je.st
news
Tag: supplies power
AC-DC Power Supplies target industrial and medical equipment.
2015-05-26 14:31:04| Industrial Newsroom - All News for Today
Providing 1,000 W of power, LCM1000 Series comprises models with nominal single outputs of 12, 15, 24, 36, or 48 V, which can be adjusted by 10%. Optional 5 V standby output enables OEM standby functions even when equipment is nominally off. With sophisticated digital control loop, power supplies offer efficiency greater than 91% at full load, typical power factor of 0.99, and power density of 7.7 W/cu-in. Digital control also enables series to be modified to suit needs of application.
Tags: power
equipment
medical
industrial
California power supplies adequate as summer heat nears
2015-05-08 05:28:10| Energy - Topix.net
With the summer heat approaching, analysts say California has sufficient power supplies to keep air conditioners running and the lights on. The agency that operates the state's wholesale power system said in an analysis Thursday that enough electricity should be available to meet demand this summer, even if an extreme hot streak sets in.
Tags: power
california
supplies
summer
AC/DC 150 W Power Supplies serve BF rated medical applications.
2015-05-06 14:31:05| Industrial Newsroom - All News for Today
Supplied in 2 x 4 x 1.3 in. open-frame package, single-output PMAM115 Series delivers 115 W continuous power with 7 cfm forced air cooling. Universal input is 85–264 Vac; available output voltages are 12, 24, or 48 Vdc; and efficiencies reach up to >91%. Design meets 2x MOPP and EN/UL 60601-1 3rd edition safety standards, and products are intended for direct patient contact (BF rated) medical applications (not life-support equipment). MTBF is >100,000 hr at full load and 25°C ambient.
Tags: power
medical
supplies
applications
DC Power Supplies support increased test system versatility.
2015-04-29 14:31:08| Industrial Newsroom - All News for Today
Advanced Power System (APS) N6900 Series supports 4 performance options. While Option 301 adds second measurement range for current (with full factory calibration), Option 302 adds external data logging as well as voltage and current digitizers with programmable sample rates. Option 303 adds constant-dwell arbitrary waveforms and output list capability, while disconnect and polarity-reversal relays (Options 760 and 761) let engineers switch voltages between positive and negative values.
Tags: support
system
power
test
Desktop External AC/DC Power Supplies meet Level VI standards.
2015-04-29 14:31:08| Industrial Newsroom - All News for Today
Accommodating 90–264 Vac universal input range, SDI90-U (90 W) and SDI120-U (120 W) series meet average efficiency and no load power requirements of US Department of Energy Level VI standards. Single-output voltages of 12, 15, 16, 18, 19, 24, and 48 Vdc are available, depending on series, and all adapters offer UL/cUL, GS, and PSE safety approvals. Products also meet radiated and conducted emission requirements for FCC Part 15B Class B and include PFC as well as protection circuitry.
Tags: level
power
meet
supplies
Sites : [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] next »