Home › chip
 

Keywords :   


Tag: chip

Revolutionary new 2D optical phased array is packed onto a single, tiny chip

2013-01-16 19:50:50| Extremetech

Though radar is the more prevalent object detection system, the lesser-known ladar -- radar that uses lasers instead of radio frequencies -- produces a more detailed result. The problem though, is that current ladar equipment is too inefficient to bring ladar to the forefront. However, with DARPA's new new tiny 2D optical phased array, that could all change.

Tags: single optical array tiny

 

Teradyne Seminars Help Customers Solve Toughest Chip Test Challenges

2013-01-16 06:03:17| Semiconductors - Topix.net

To help customers meet these challenges, Teradyne, Inc. hosted its fifth annual Device Test Seminar series in December 2012.

Tags: test customers challenges solve

 
 

Thin Film Chip Resistor Arrays offer tolerances as low as 0.1%.

2013-01-14 14:30:35| Industrial Newsroom - All News for Today

Offering 4 resistive elements in package measuring 1.6 x 3.2 mm, RAVN Series features resistance values from 100 Ω to 33 KΩ in 0.1% tolerance. Units can also achieve 10 ppm TCR for limited resistance value range. Providing environmental and electrical stability, resistor arrays are suited for test instrumentation, gauges, meters, and scopes as well as precision controls, robotics, and high-speed data communication. This story is related to the following:Chip Resistors | Thin Film Resistors

Tags: as low offer film

 

Recommended Soldering Techniques for SMD, Chip, Flangeless, and Flanged Resistors

2013-01-14 11:09:40| electronicsweb Downloads

This application note provides recommendations for attached Anaren’s SMD, chip, flangeless, and flanged resistive products. A good solder joint can be critical in achieving a chip’s maximum performance. Mounting considerations for each different type are included with accompanying figures for visual aids. All Anaren resistives have a matte tin outside finish to achieve good solderability and RoHS compliance.

Tags: techniques recommended chip smd

 

Recommended Soldering Techniques for SMD, Chip, Flangeless, and Flanged Resistors

2013-01-14 11:09:40| rfglobalnet Downloads

This application note provides recommendations for attached Anaren’s SMD, chip, flangeless, and flanged resistive products. A good solder joint can be critical in achieving a chip’s maximum performance. Mounting considerations for each different type are included with accompanying figures for visual aids. All Anaren resistives have a matte tin outside finish to achieve good solderability and RoHS compliance.

Tags: techniques recommended chip smd

 

Sites : [210] [211] [212] [213] [214] [215] [216] [217] [218] [219] [220] [221] [222] [223] [224] next »