je.st
news
Tag: dcdc
Chassis Mount 350 W DC/DC Converter has 9-36 Vdc input range.
2016-03-30 14:31:05| Industrial Newsroom - All News for Today
Offering 12, 24, and 28 Vdc outputs, TCM Series features fully input to output isolation of 2,250 Vdc, switching frequency of 200 kHz, efficiencies over 96%, and MTBF of 5.4M hr. Encapsulated 3.20 x 4.53 x 1.00 in. case is designed for backplane or enclosure mounting with or without DIN rails. Through holes are provided in case for backplane mounting, and DIN adapter is available. Threaded through holes allow installation of heatsink for extended temperature operation.
Tags: range
input
mount
converter
Digital Hybrid DC/DC Controllers support PMBus(TM).
2016-03-29 14:31:04| Industrial Newsroom - All News for Today
Providing point-of-load conversion for FPGAs, DSPs, ASICs, and processors, Model ISL68200 with integrated MOSFET drivers and Model ISL68201 with PWM output simplify power supply designs for data center equipment. ISL68200 can drive external MOSFETs directly, while ISL68201 is paired with DrMOS power stage to create complete voltage regulator solution. Both leverage R4 modulation technology, which provides compensation free control loop that eliminates external compensation resistors and capacitors.
Tags: support
digital
hybrid
controllers
DC/DC Controller has 3.8-65 V operating range.
2016-03-29 14:31:04| Industrial Newsroom - All News for Today
Supplied in 8-pin, 6 x 6 x 0.9 mm VQFN package, LM5140-Q1 incorporates features designed to reduce EMI and high-frequency noise in high-voltage DC/DC step-down applications. This dual-channel, synchronous buck converter uses external MOSFETs to support up to 10 A dual-channel loads and features dual outputs with phase interleaving. Adjustable gate-drive slew-rate control, 2.2 MHz operation with external synchronization capability, and 35 µA quiescent current are standard.
Tags: range
operating
controller
dcdc
PoL DC-DC Converters feature high power density.
2016-03-24 13:31:06| Industrial Newsroom - All News for Today
Delivering 6, 12, and 18 A, respectively, Models OKDL-T/6-W12, OKDL-T/12-W12, and OKDL-T/18-W12 can be monitored and configured via PMBus™ communications. Digitally controlled, non-isolated units accept input voltages from 4.5–14 V and have adjustable output voltage range from 0.6–5 V. Measuring 0.48 x 0.48 x 0.315 in., converters offer typical efficiency of 91.6% at 12 Vin and operate from -30 to +95°C, making them suited for networking, computing, servers, telecom, and industrial applications.
Tags: high
power
feature
density
Medical DC/DC Converters offer 2 x MOPP, patient leakage to 2 A.
2016-03-24 13:31:06| Industrial Newsroom - All News for Today
JHL03 (3 W) and JHL06 (6 W) series are available with 5/12/15 Vdc single outputs and ±12 or ±15 Vdc dual outputs as well as 10–17 Vdc or 20–30 Vdc input. In addition to 5/12/15 Vdc single outputs, JHM15 (15 W) series offers ±5, ±12, or ±15 Vdc dual outputs and 2:1 input voltage range options of 9–18 Vdc or 18–36 Vdc. All models are encapsulated, isolated, and regulated DC/DC converters approved to 3rd edition international medical safety standards EN60601-1:2006 and ANSI/AAMI ES60601-1:2005.
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] next »