je.st
news
Tag: voltage
4 to 5.5 foot sites without high voltage power lines
2014-01-15 00:07:33| PortlandOnline
8.5 foot and greater sites without high voltage power lines
2014-01-15 00:07:33| PortlandOnline
Power Monitors measure 3 phases of current and voltage.
2014-01-08 14:31:03| Industrial Newsroom - All News for Today
Powered from external supply for measurement accuracy, APN Series computes 14 values necessary to track power usage in RS485 Modbus RTU format, which is compatible with many PLCs. Digital units can be configured to accept standard 5 A current transformer inputs or sensors producing 333 mVac proportional to AC current of circuit, or they can use factory matched Rogowski coil inputs. Primary circuit voltage is connected directly to monitor for 600 Vac or lower. This story is related to the following:Test and Measuring InstrumentsSearch for suppliers of: Power Monitors
Tags: current
power
measure
monitors
Digital Hall Effect Sensor ICs support low voltage operation.
2013-12-30 14:30:58| Industrial Newsroom - All News for Today
Operating from 2.7–24 V, MLX92231 and MLX92211 integrate Hall sensor element with offset cancellation mechanism, voltage regulator, and open-drain output driver. EEPROM memory, included, allows magnetic switching thresholds to be configured (including hysteresis). While MLX92211 targets applications requiring Hall effect latch magnetic characteristics, MLX92231 supports applications for Hall effect switch magnetic behavior. Both are constructed on mixed signal CMOS process technology. This story is related to the following:Electronic Components and Devices Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!Search for suppliers of: Integrated Circuits (IC)
Tags: support
low
digital
effect
Voltage Controlled Oscillator delivers +2.5 dBm output power.
2013-12-30 14:30:58| Industrial Newsroom - All News for Today
Operating at 2,380 MHz with control voltage range of 0.3~4.7 V, Model CVCO55CC-2380-2380 features typical phase noise of -119 dBc/Hz at 10 KHz offset. Input voltage is 5 V, with max current consumption of 35 mA. Pulling and Pushing are minimized to 1.0 MHz and 0.5 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, USA-made oscillator is suited for digital radio equipment, fixed wireless access, satellite communications systems, and base stations. This story is related to the following:Voltage Controlled Oscillators (VCO) |
Tags: power
output
controlled
delivers
Sites : [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] next »