je.st
news
Tag: level sensor
Teflon-Coated Level Sensor handles sticky materials.
2016-03-28 14:31:07| Industrial Newsroom - All News for Today
Specifically adapted for measuring powders and solids material that may adhere to sensor probe, Spike Bob is suited for use with silica or frack sand, powdered chemicals or minerals, additives and ingredients. Acting as automated tape measure, sensor takes measurements at predetermined time intervals or on demand. Unit is automatically dropped to material surface where it immediately retracts and, by counting pulses, calculates accurate measurement from top of silo to material surface.
Tags: level
materials
sensor
handles
Bulk Solids Point Level Sensor works in small bins and hoppers.
2016-03-10 14:31:07| Industrial Newsroom - All News for Today
Supporting -40 to +185°F range that suits diverse industrial environments, Mini-Rotary features polycarbonate NEMA1 housing and can be used as low- or high-level alert for dry solids with bulk density of at least 2 lb/ft³ to 30+ lb/ft³. This point level sensor, employing slow-speed motor to rotate paddle (4-vane or bayonet-style polycarbonate), uses light- or horn-based alert to notify operator of full bin. No calibration is required, and adjustable sensitivity prevents false alarms.
Continuous Level Sensor features horizontal mounting.
2016-03-01 14:31:04| Industrial Newsroom - All News for Today
Designed for instances where installation atop bins, tanks, or silos is not possible, SmartBob HM features rigid extension, custom-made from 12–36 ft long, that permits installation on bin's side through 4 ft opening. Level measurements, taken at pre-determined time intervals at location directly below probe, are sent directly to control console or eBob software installed on PC. Weight-and-cable based level sensor is listed for Class II, Groups E/F/G and enclosure types NEMA 4X, 5, and 12.
Tags: level
features
continuous
horizontal
Intrinsically Safe Level Sensor incorporates HLS technology.
2015-11-11 14:31:06| Industrial Newsroom - All News for Today
Providing direct measurement of level and temperature, hazardous location-certified Model 2100 Digital Level Sensor (DLS) with High Level Shut-In (HLS) helps operators with production storage tanks meet Category 3, API STD 2350 requirements while mitigating risk of environmental exposure to petrochemicals. Sensing technology ensures measurement of up to 2 levels and 8 temperature measurements in same tank, and dedicated safety circuit ensures high and high-high level overfill protection.
Tags: level
technology
safe
sensor
Weather Stations utilize snow level sensor option.
2015-10-07 14:31:07| Industrial Newsroom - All News for Today
Available as option for Weather MicroServer which can be used with any CWS weather station model, Snow Level Sensor transmits ultrasonic pulsed sound wave through air to meet reflective object, such as snow. When sound wave makes contact with target, it bounces back toward sensor, which records time required for sound wave to travel to target and return. Using speed of sound, sensor calculates distance to object.
Tags: level
option
weather
snow