je.st
news
Tag: testing engineer
Technician E2 Space Environmental Effects Testing Engineer Support
2016-09-15 16:03:37| Space-careers.com Jobs RSS
Ajilon Technology Aerospace is looking for a Technician E2 Space Environmental Effects Testing Engineer Support E2 for an opportunity at the European Space Agency in the Netherlands Ajilon Technology Aerospace is a specialised Engineering consultancy with more than 30 years experience providing aerospace Engineers to our key partners in The Netherlands. Ajilon is a longstanding business partner of the European Space Agency ESA, with more than 100 employees recruited from across Europe currently supporting ESAs activities. Specific tasks to be performed Giving assistance to run tests in the laboratory Motivated to realise new experimental setup in a timely manner Be able to summarise testing activities in technical reports Main activity is to support practical laboratory work prepare and execute test activities etc. General tasks to be performed Main activity is to support practical laboratory work. Providing assistance, prepare and execute test activities in the laboratory and supporting in the following areas To set up and monitor standard, materials related tests in a variety of special environmental test chambers particularly Atomic Oxygen and Low Orbit tests, which simulate various space environments. Operating state of the art space simulation facilities UV and particles as well as synergistic testing and evaluation of the effects on materials tested. Performing common materials analysis investigations like microscopic spectroscopic analysis after space simulation. Performing surface and near surface sensitive characterisation of materials after space environmental simulation. This requires the operation of state of the art instruments like Raman, ESCA, NMR and ESR facilities. Improving test procedures and ensuring that these are executed correctly. Design and perform nonstandard tests to meet special space project requirements as well as develop in situ analysis techniques. Traceability of test exposure conditions and follows the effect of the exposure on samples. Recording sample properties or condition during and after test, accurately and legibly. Checking on test equipment performance and reporting any anomalies or faults. Producing clear and professional reports in English as specified for the task. Supporting the inclusion of results in internal databases. Maintenance of the relevant test equipment. The Contractor shall ensure that the equipment under his responsibility is kept in an operational state and shall ensure that all necessary routine calibration and maintenance activities are carried out. To successfully perform the above mentioned tasks, the following background experience is required Able to read mechanical drawings Electrical basic knowledge Mechanical basic knowledge Knowledge in vacuum technology would be an asset Technician level in Materials Technology with demonstrated laboratory work experience. Materials science with a good working knowledge of materials process technology, a good understanding of physics and minimal two years of practical experience in a controlled test environment. A good understanding of metallography, optical microscopy, Scanning Electron Microscopy and mechanical testing is a specific asset The holder of the post shall speakwrite English with a technical working level, with several years of experience in material physical and chemical laboratory investigations. Experience and knowledge of electrical and mechanical systems in a laboratory environment. Motivated to realise new experimental setup in a timely manner Be able to summarise testing activities in technical reports Please send your CV to technologyaerospaceajilon.nl before 30092016
Tags: support
space
effects
testing
Space Environmental Effects Testing Engineer Support E2
2016-08-02 16:05:41| Space-careers.com Jobs RSS
Ajilon Technology Aerospace is looking for a Technician E2 Space Environmental Effects Testing Engineer Support E2 for an opportunity at the European Space Agency in the Netherlands Ajilon Technology Aerospace is a specialised Engineering consultancy with more than 30 years experience providing aerospace Engineers to our key partners in The Netherlands. Ajilon is a longstanding business partner of the European Space Agency ESA, with more than 100 employees recruited from across Europe currently supporting ESAs activities. General tasks to be performed Main activity is to support practical laboratory work. Providing assistance, prepare and execute test activities in the laboratory and supporting in the following areas To set up and monitor standard, materials related tests in a variety of special environmental test chambers particularly Atomic Oxygen and Low Orbit tests, which simulate various space environments. Operating state of the art space simulation facilities UV and particles as well as synergistic testing and evaluation of the effects on materials tested. Performing common materials analysis investigations like microscopic spectroscopic analysis after space simulation. Performing surface and near surface sensitive characterisation of materials after space environmental simulation. This requires the operation of state of the art instruments like Raman, ESCA, NMR and ESR facilities. Improving test procedures and ensuring that these are executed correctly. Design and perform nonstandard tests to meet special space project requirements as well as develop in situ analysis techniques. Traceability of test exposure conditions and follows the effect of the exposure on samples. Recording sample properties or condition during and after test, accurately and legibly. Checking on test equipment performance and reporting any anomalies or faults. Producing clear and professional reports in English as specified for the task. Supporting the inclusion of results in internal databases. Maintenance of the relevant test equipment. The Contractor shall ensure that the equipment under his responsibility is kept in an operational state and shall ensure that all necessary routine calibration and maintenance activities are carried out. To successfully perform the above mentioned tasks, the following background experience is required Technician level in Materials Technology with demonstrated laboratory work experience. Materials science with a good working knowledge of materials process technology, a good understanding of physics and minimal two years of practical experience in a controlled test environment. A good understanding of metallography, optical microscopy, Scanning Electron Microscopy and mechanical testing is a specific asset The holder of the post shall speakwrite English with a technical working level, with several years of experience in material physical and chemical laboratory investigations. Experience and knowledge of electrical and mechanical systems in a laboratory environment. Motivated to realise new experimental setup in a timely manner Be able to summarise testing activities in technical reports Able to read mechanical drawings Electrical basic knowledge Mechanical basic knowledge Knowledge in vacuum technology would be an asset About ESAESTEC The European Space Agency ESA has sites in several European countries. The European Space Research and Technology Centre ESTEC is the largest site and the technical heart of ESA. This nursery of European space activities is located in Noordwijk, Netherlands. At ESTEC, about 2500 engineers, technicians and scientists work handson with mission design, spacecraft and space technology. Almost all ESA projects except launchers are managed from ESTEC. In Noordwijk, people work on science missions, manned space missions, Earth observation, telecommunications and navigation satellites. ESTEC provides extensive testing facilities to verify the proper operation of spacecraft, such as the Large Space Simulator LSS, acoustic and electromagnetic testing bays, multiaxis vibration tables and the ESA Propulsion Laboratory EPL. Please send your CV to technologyaerospaceajilon.nl before 12082016
Tags: support
space
effects
testing
Environmental Effects Testing for Materials Engineer 1611059
2016-03-30 09:07:19| Space-careers.com Jobs RSS
Solenix is specialized in the provision of highquality software engineering, technical consulting and operations services in the aerospace domain. This vacancy note concerns an onsite consulting position at ESTEC in Noordwijk in The Netherlands. Environmental Effects Testing for Materials Engineer 1611059 Job Description We are looking for an Environmental Effects Testing Materials Engineer for our client ESTEC. You will be part of the Product Assurance and Safety team and your tasks shall include Advanced materials testing with a main focus on space environmental materials testing activities. This includes vacuum, radiation, charged particles and neutral atmospheres and synergistic testing. Testing includes setting up test facilities, test procedures and execution of agreed test plans. Modifications of testing facilities as required by customer needs. Performing common materials analysis investigations like microscopic spectroscopic analysis and thermal analysis before and after space simulation. Performing surface and near surface sensitive characterisation of materials after space environmental simulation. This requires the operation of state of the art instruments like Raman, ESCA, NMR and ESR facilities. Design and perform nonstandard tests to meet special space project requirements as well as develop in situ analysis techniques. Traceability of test exposure conditions and follows the effect of the exposure on samples. Carrying out testing analysis in an ISO 17025 compliant manner including procedure and documentation development. Required Skills and Experience A university degree in materials science with a good working knowledge of materials process technology and a good understanding of physics Minimum two years of practical experience in a controlled test environment Be familiar with testing, monitoring data acquisition e.g. LABVIEW and controlling instruments Be able to work independently and have confidence to deal directly with customers, in person or by telephone. Work Location Noordwijk, Netherlands Dates Application Deadline 11 April 2016 Start of Work May 2016 Important Notes Before applying to this position, please read the page Notes to Applicants on the Solenix website under Career. Applicants must be EU citizens or have a valid work and residence permit in the Netherlands. Security, identity and reference checks on the candidates are part of the recruitment process. Job Application Please send your applications electronically to careersolenix.ch before the application deadline 11 April 2016 Learn more about us in Facebook
Tags: effects
materials
testing
environmental
Metallurgical Engineer Joins Laboratory Testing Inc.
2014-06-06 11:59:06| metrologyworld News Articles
Greg Fackler has accepted the position of Metallurgical Engineer at Laboratory Testing Inc. (LTI)
Tags: testing
laboratory
engineer
joins
Metallurgical Engineer Joins Laboratory Testing Inc.
2014-05-30 06:00:00| Industrial Newsroom - All News for Today
HATFIELD, PA – Greg Fackler has accepted the position of Metallurgical Engineer at Laboratory Testing Inc. (LTI). In this capacity, he joins the team of Metallurgical Engineers in the company’s Metallography Lab and will be responsible for performing the full-range of metallography services including microstructure examinations, macrostructure examinations and microhardness testing in accordance with AMS, ASTM, ASME and MIL specifications. Fackler will also handle SEM analysis and ...
Tags: testing
laboratory
engineer
joins
Sites : [1] [2]