Home vise
 

Keywords :   


Tag: vise

Centric Clamping Vise increases versatility via adaptability.

2016-03-17 13:31:05| Industrial Newsroom - All News for Today

Available with 40, 80, or 125 mm jaw width and up to 25 kN clamping force, KONTEC KSC 80 provides optimal jaw support for ID and OD clamping. This multifaceted component, which can be adapted for conventional clamping, short clamping depths for 5-sided machining, mold parts, plates, or saw cuts, features pre-tensioned, backlash-free center bearing and extra fitted slide to ensure repeat accuracy of ±0.01 mm. Also, integrated chip drain and protected spindle promote process reliability.

Tags: increases vise centric versatility

 

Vertical Vise mounts to back of host vise.

2016-02-29 14:31:06| Industrial Newsroom - All News for Today

Available in 2 models made of 80,000 psi ductile iron, SideWinder™ provides vertical workholding without interfering with existing host vise or spindle. Unit expands capabilities of 6 or 8 in. vises by adding vertical clamping above and behind host vise, and provides spindle access for secondary or final machining operations. Both models include workstop to position height of work part, and integral bracket with stabilization feature, allowing mounting to machine table on movable end of vise.

Tags: back host vertical vise

 
 

Five-Axis Vise features 4140 steel construction.

2015-12-18 14:31:08| Industrial Newsroom - All News for Today

With up to 4,000 lb of precision clamping force, DoveLock™ Vise holds parts without distorting workpiece while providing access to 5 sides of workpiece. Dovetail holding feature, requiring only 1/8 in. of material height to hold part, simplifies workpiece material preparation so that no machined jaws are necessary. For fast positioning in vise jaws, DoveLock™ features embedded locating pin. Vise offers 2.00 in. jaw width, max jaw opening of 1.688 in., and overall stroke of .500 in.

Tags: features construction steel vise

 

Powerful Clamping System: KONTEC KSX Vise

2015-05-20 12:31:11| Industrial Newsroom - All News for Today

The KONTEC KSX vise from SCHUNK is a powerful clamping system for simultaneous 5-axis machining. The compact and easily accessible clamping system can handle tool-free adjustable clamping forces between 4 and 40 kN, (measured directly at the workpiece.) This offers a safe and secure hold, even for minimum clamping...

Tags: system powerful vise clamping

 

Dove Tail Vise supports aggressive 5-axis machining.

2015-03-05 14:31:09| Industrial Newsroom - All News for Today

Providing up to 4,000 lb of precision clamping force, DoveLock™ holds parts without distorting workpiece while providing access to 5 surfaces of workpiece. Unit is built from pre-hardened 4140 steel for rigidity with ½ in. movable jaw stroke, max jaw opening of 1.688 in., and overall stroke of .500 in. Embedded locating pin maintains part location accuracy when applying side load pressure. When under high machining pressure, deflection and clamp creep is minimized by vise design.

Tags: supports dove tail aggressive

 

Sites : [1] [2] [3] [4] next »