je.st
news
Tag: mhz
OCXOs feature frequency range from 10-40 MHz.
2014-04-16 14:30:29| Industrial Newsroom - All News for Today
Measuring 9 x 14 mm, Series OX1000 features temperature stability as low as 10 ppb from -40 to +85°C and phase noise down to -150 dBc/Hz at 100 KHz from carrier. Outputs are available in both clipped sine wave and HCMOS technologies. Units achieve accurate frequency stability with SC cut crystal, and meet wander requirements of GR-1244. With power supply voltage of 3.3 Vdc, oscillators feature current consumption of 600 mA during warm-up and 300 mA in steady state. This story is related to the following:Crystal Oscillators |
Tags: range
feature
frequency
mhz
Voltage Controlled Oscillator operates at 2,950 MHz.
2014-04-15 14:30:31| Industrial Newsroom - All News for Today
With 0.5–4.5 V control voltage range, CVCO55CC-2950-2950 features typ phase noise of -115 dBc/Hz @ 10 KHz offset and typ output power of +7 dBm. SMD package measures 0.5 x 0.5 in., input voltage is 8 V, and max current consumption is 30 mA. Respectively, pulling and pushing are minimized to 3 MHz and 0.1 MHz/V. Second harmonic suppression is -15 dBc typ. Uses include such applications as digital radio equipment, fixed wireless access, satellite communications systems, and base stations. This story is related to the following:Voltage Controlled Oscillators (VCO)
Tags: controlled
mhz
operates
voltage
Richardson RFPD Introduces New 450 MHz To 4 GHz, High Isolation SP4T Switch From Peregrine
2014-04-01 10:30:06| rfglobalnet Home Page
Richardson RFPD, Inc. recently announces immediate availability and full design support capabilities for a new absorptive RF single-pole four-throw (SP4T) switch from Peregrine Semiconductor Corporation (Peregrine).
Tags: high
switch
mhz
isolation
Voltage Controlled Oscillator operates at 3,200 MHz.
2014-03-31 14:31:24| Industrial Newsroom - All News for Today
Operating at 3,200 MHz with control voltage of 0.5~4.5 V, Model CVCO55CC-3200-3200 features output power of +5 dBm and typical phase noise of -112 dBc/Hz at 10 KHz offset. Input voltage is 8 V, with max current consumption of 30 mA. Pulling and Pushing are minimized to 3 MHz and 0.1 MHz/V, respectively, and second harmonic suppression is -12 dBc typical. Housed in 0.5 x 0.5 in. SMD package, VCO is suited for digital radio equipment, fixed wireless access, and satellite communications systems. This story is related to the following:Voltage Controlled Oscillators (VCO) | Oscillators
Tags: controlled
mhz
operates
voltage
New 3200 MHz VCO From Crystek Corporation
2014-03-25 07:00:52| rfglobalnet Home Page
Crystek's CVCO55CC-3200-3200 VCO (Voltage Controlled Oscillator) operates at 3200 MHz with a control voltage range of 0.5 V to 4.5 V. This VCO features a typical phase noise of -112 dBc/Hz @ 10 kHz offset and has excellent linearity. Output power is typically +5 dBm.
Tags: corporation
mhz
vco
3200 mhz
Sites : [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] next »