je.st
news
Tag: dcdc converters
DC-DC Converters support remote I/O applications.
2013-05-21 14:33:49| Industrial Newsroom - All News for Today
Running 24 Vdc controls from 12 Vdc batteries or chargers, 789 Series powers I/O within mobile manufacturing, remote energy production, and material handling applications. Units operate from input ranges of 8–16 Vdc or 19.2–28.8 Vdc and provide up to 90% efficiency; input polarity safeguards electronics. Measuring 17.5 mm wide, converters feature temperature range of -25 to +55°C or -40 to +70°C, and include vibration-resistant, maintenance-free CAGE CLAMP® Spring Pressure terminations. This story is related to the following:DC To DC Converters
Tags: support
applications
remote
converters
DC-DC Converters target fuel cell powered systems.
2013-05-17 14:31:21| Industrial Newsroom - All News for Today
Accepting 50–120 V input from fuel cells, FC Series delivers stabilized output up to 500 W with power efficiency up to 91%. Units are available with output voltages of 12, 24, 28, and 48 Vdc. Housed in full brick 11.68 x 6.10 x 1.27 cm format with power densities up to 5.53 W/cm³, modules include over-voltage, under-voltage, and short-circuit protection, as well as monitoring feature that safeguards against system failure. Units operate from -20 to +100°C with MTBF of 1.1 million hours. This story is related to the following:Green & CleanSearch for suppliers of:
Tags: powered
systems
cell
target
DC/DC Converters feature UL 60601 medical approval.
2013-05-14 14:31:03| Industrial Newsroom - All News for Today
Housed in 2 x 1 in. case with 2:1 input range and nominal input voltages of 12, 24, and 48 Vdc, TMR Series provides 10 W of fully regulated output power. Converters offer single outputs of 5 and 12 Vdc as well as dual outputs of ±12 and ±15 Vdc. Encapsulated with thermally conductive potting compound in non-conductive UL94V-0 rated plastic case, RoHS-compliant devices operate from -40 to +75°C and have 4,200 Vac isolation. This story is related to the following:DC To DC Converters
Tags: medical
feature
approval
converters
Isolated DC/DC Converters have SMT, radiation-hardened design.
2013-05-09 14:30:36| Industrial Newsroom - All News for Today
Suited for aerospace applications, SB30-100 series provides SEE-rated protection – 100 kRad (Si) TID – against total dose ionized radiation. Features include ability to directly convert power from satellite solar panel to end voltages required by FPGAs, DSPs, CPUs, MCUs, and other digital devices. Designed and constructed using SMT, converters provide 3 independent isolated outputs, typically at +5.0, +3.3 and +2.5 V at 30 W total, each of which is adjustable to ±10% and has its own PWM. This story is related to the following:DC To DC Converters
Tags: design
isolated
converters
smt
Encapsulated DC-DC Converters feature compact design.
2013-05-01 14:26:27| Industrial Newsroom - All News for Today
TRACOPOWER THN-30 series DC-DC Converters have 2:1 input, 9-18/18-36/36-72 Vin range while THN-30WI series has 4:1 input, 9-36/18-75 Vin range. With efficiencies up to 92% and 1,500 Vdc isolation, units operate over temperatures of –40 to +55°C at full load or up to 85°C with optional heat-sink or output power de-rating. Encapsulated and shielded package measures 1 x 1 x 0.4 in. Over-current, -voltage, and -temperature protection and remote on/off control are included. This story is related to the following:DC To DC Converters
Tags: design
feature
compact
converters
Sites : [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] next »