je.st
news
Tag: dcdc converters
IR's ML Series Radiation Hardened DC-DC Converters Simplify Power Systems For Space RF Equipment
2013-07-10 11:00:00| wirelessdesignonline News Articles
International Rectifier, IR, a world leader in power management technology, recently introduced the radiation hardened ML Series dual output DC-DC power converter platform designed for RF communication equipment such as low noise amplifiers (LNA), receivers and frequency converters used onboard satellites.
Tags: power
systems
series
equipment
DC-DC Brick Converters provide up to 700 W.
2013-06-14 14:27:44| Industrial Newsroom - All News for Today
Housed in quarter, half, and full brick packages, base-plate cooled DC-DC Power Supplies provide up to 700 W without fan cooling or forced airflow. Units feature 2:1 or 4:1 wide input voltage ranges, output voltage adjust, and remote On/Off, as well as over-current, short-circuit, over-voltage, and over-temperature protection. Available with optional heat sinks, mounting kits, thermal pads, and EMC chokes, converters are suited for railway and industrial applications. This story is related to the following:DC To DC Converters |
Tags: w
provide
brick
converters
DC/DC Converters Feature 20kV Isolation
2013-06-12 13:31:00| Railway Technology
ABSOPULSE Electronics' DIO 120 Series of dc/dc converters were developed for powering electronic circuits floating on several kilovolts of operating voltage. They are typically used for high power gate drivers and similar applications in oil and gas,
Tags: feature
isolation
converters
dcdc
Open-Frame 120 W DC/DC Converters feature 20 kV isolation.
2013-06-05 14:28:08| Industrial Newsroom - All News for Today
Developed for powering electronic circuits, DIO 120 Series accepts 24 or 48 Vdc input and delivers single 12, 15, or 24 Vdc output (5 A current limit). Other inputs and outputs, as well as built-in redundancy diode for parallel and N+1 operation, are available upon request. Tested for corona extinction at 10 kVrms min and Hi-Pot tested for 20 kVrms, convection-cooled converters offer protection circuitry and 102 x 305 mm footprint with 70 mm max component height. This story is related to the following:DC To DC Converters |
Tags: feature
isolation
converters
dcdc
DC-DC Converters use synchronous rectifier technology.
2013-05-31 14:31:38| Industrial Newsroom - All News for Today
Measuring 5.0 x 5.7 x 2.1 mm, Model LXDC55FAAA-203 supports input voltage of 4.0–14.0 Vdc and provides max output current up to 1.5 A, while Model LXDC55KAAA-205 has input voltage of 2.7–5.5 Vdc with output current up to 3 A. Both step down converters offer voltage trim function that allows adjustment of output voltage within range of 0.8–5.3 Vdc for 55F model and up to 3.6 Vdc for 55K model. Units are constructed on multilayer ferrite substrate that integrates embedded inductor and power IC. This story is related to the following:Electronic Components and DevicesSearch for suppliers of: Integrated Circuits (IC)
Tags: technology
converters
synchronous
rectifier
Sites : [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] next »