je.st
news
Tag: din
DIN Adapter suits wireless infrastructure applications.
2014-07-07 14:30:40| Industrial Newsroom - All News for Today
Expanding 7/16 DIN connector and adapter line, P2RFD-1654-4 Female to Female Bulkhead Adapter is manufactured with machined brass body and tri-metal plating. Unit features PIM rating of better than -155 dBc at 2X43 dBm and VSWR of less than 1.2:1 within operating frequency of 0–8 GHz. Equipped with recessed O-ring for weather sealing, adapter has double flats machined on 2 sides along with lock washer and hex nut for secure mounting to panel or bulkhead. This story is related to the following:DIN Connectors | Adapters
Tags: applications
din
wireless
infrastructure
Mini DIN Adapters suit low PIM performance applications.
2014-06-24 14:30:57| Industrial Newsroom - All News for Today
Both 4.1/9.5 (Mini) DIN male to female right angle (Part No. RFD-4195-1952) and straight (Part No. RFD-4195-1950) adapters have hex nuts on male interface sized to facilitate mating via torque wrench. Right angle part features radius internal design that provides constant 50 Ω impedance for optimum electrical performance to 7.5 GHz, and all adapters are manufactured with brass bodies in non-tarnish tri-metal (white bronze) plating with PIM rating of ≤-160 dBc using 2 tones at 20 W. This story is related to the following:Adapters |
Tags: low
performance
mini
applications
RF Industries Expands Offering Of Low PIM 4.1/9.5 (Mini) DIN Adapters With 2 New Variations
2014-06-20 12:57:20| rfglobalnet Home Page
In addition to 8 variations of4.1/9.5 (Mini) DINto N type and 7/16 DIN adapters, RF Industries developed a 4.1/9.5 (Mini) DIN male to female right angle and straight adapters.
DIN Rail Mount IEC Terminal Blocks carry UL and CE approvals.
2014-06-05 14:31:04| Industrial Newsroom - All News for Today
Featuring universal foot for DIN rail mounting, ASIUKN single-level, feed-through, IEC terminal blocks suit control cabinet and power distribution applications. UL94V0 housing, nickel-plated copper alloy metal bodies, and plated alloy screws provide protection against various environments. While 4.2 mm wide DIN rail mounted terminal block handles 30–14 AWG wire with 15 A rating at 300 V, larger blocks measure 15.2 mm wide and handle 18–2 AWG wire with rating of 150 A at 600 V. This story is related to the following:Terminal Blocks
Tags: din
carry
mount
terminal
Ethernet-to-RS485 Converter mounts on DIN rail.
2014-06-04 14:30:31| Industrial Newsroom - All News for Today
With Laureate LTNET485, users can connect Ethernet LAN to mix of up to 31 Laureate meters and LT Series transmitters on RS485 bus. Connection to Ethernet is via standard RJ45 jack, and connection to RS485 bus can be via RJ11 jack or via discrete screw terminals. Supplied with RS485 I/O, transmitters can be connected to LTNET485 using 3 or 5 discrete parallel wires, with no need for hub. Laureate meters need to be equipped with RS485 option board with dual RJ11 jacks. This story is related to the following:Signal Converters
Tags: din
converter
rail
mounts
Sites : [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] next »