je.st
news
Tag: feeder
Bar Feeder Alignment System accepts bores down to ¾ in. dia.
2013-08-19 14:27:36| Industrial Newsroom - All News for Today
Featuring instantaneous set-up using self-centering laser tool, Model L56SS provides laser beam that is straight to ±.010 in. at 10 ft. Battery-powered system is chucked within lathe's spindle so that laser beam shoots through spindle and down carriage of bar feeder. Two targets register left/right and up/down positions of front and back portion of bar feeder's carriage. Depending on style of bar feeder, up and down height is adjusted manually each time new diameter of bar stock is loaded. This story is related to the following:Laser Alignment Systems
Sanitary Powder Feeder is Designed for Sanitary Processes Video
2013-08-14 15:19:58| chemicalonline News Articles
The Schenck AccuRate PureFeed® AP-300 feeder was designed specifically for sanitary processes that include the following customer driven features: quick and easy disassembly, a dual arm agitation system for maximizing material handling versatility, and an FDA compliant EPDM feed hopper that is disposable and recyclable. That means simpler, shorter cleaning cycles and virtually, no chance of cross contamination when moving from one material to another. The PureFeed® AP-300 is available in volumetric and gravimetric configurations with feed rates from 0.5 to approximately 150 Kg / hour.
Tags: video
designed
processes
powder
Stumped by the Code? Sizing Overcurrent Protection for Branch Circuits, Class III Hazardous (Classified) Location, Minimum Clearances of Overhead Feeder Conductors, and More
2013-08-13 21:29:00| Electrical Construction & Maintenance
By Mike Holt, NEC Consultant Your most pressing National Electrical Code (NEC) questions answered read more
Tags: more
location
code
class
August 9, 2013 USDA National Feeder Cattle Summary | Feeder Steers & Heifers Steady to $3 Higher
2013-08-12 17:04:00| Beef
For the week ending August 9, feeder steers and heifers sold steady to $3 higher. read more
Tags: to
august
national
summary
Rotary Airlock Feeder is USDA, FDA, and Dairy 3A approved.
2013-08-09 14:34:28| Industrial Newsroom - All News for Today
Suited for use when frequent cleaning and sanitary service is required to prevent product contamination, Klean-In-Place II® special purpose valve has self-aligning drive design and is available with square or round flanges, standard airlock options, and USDA and sanitary construction. Common 3/16” Allen wrench can remove rotor from housing, and 2 slide bar supports, using linear bearings, provide max support of rotor while it is pulled out. This story is related to the following:Airlock Valves
Tags: approved
rotary
dairy
fda
Sites : [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] next »