je.st
news
Tag: clamping
Hydraulic Expansion Toolholder offers ¾ in. dia clamping.
2013-09-25 14:30:44| Industrial Newsroom - All News for Today
Available for SK 40 and CAT 40 interfaces, TENDOS-ES Toolholder allows tool to be clamped directly in mounting taper, so tool shank is supported via spindle. Clamping diameter is 20 mm, and standard TENDO sleeves can be used to clamp smaller tool shank diameters with balancing grade of G 2.5 at 25,000 rpm. With run-out accuracy of less than 0.003 mm, 26.0 mm TENDOS-ES L1 is suited for rough machining, drilling, reaming, tapping, thread milling, and thread forming. This story is related to the following:Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving TechnologiesSearch for suppliers of: Toolholders |
Tags: offers
dia
expansion
hydraulic
Clamping Force Block offers flexible chuck jaw monitoring.
2013-09-25 14:30:43| Industrial Newsroom - All News for Today
With one-piece rigid base body, wedge hook kinematics, and long ground jaw guides, TANDEM KSP plus provides concentrated clamping forces up to 55 kN with repeat accuracy up to 0.01 m. Whether using ID or OD clamping, opened or clamped positions for any base jaw position can be adjusted. Monitoring is done via 2 inductive proximity switches, which are integrated in recesses in base jaws. Optimized outside contour and minimum gaps prevent build-up of dust pockets or chips. This story is related to the following:Clamp Blocks
Tags: offers
force
block
monitoring
Clamping System, PCBN Grades enable efficient cast iron machining.
2013-09-19 14:31:48| Industrial Newsroom - All News for Today
Beyond Shield™ has 3-point, carbide-clad clamp that exhibits wear resistance against chip flow and applies clamping force toward front of insert to reduce vibrations that can lead to cracking/failure. With this rigid clamping system, smaller IC PCBN (polycrystalline cubic boron nitride) inserts can perform well in same applications as larger IC inserts. Available grades include KBK35™ with multi-modal PCBN structure and CVD coating as well as KB1340™ for parts involving aged cast iron. This story is related to the following:Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving TechnologiesSearch for suppliers of: Clamping Systems
Tags: system
cast
enable
efficient
Electric OD Clamping End Prep Tool features 950 W motor.
2013-09-16 14:29:26| Industrial Newsroom - All News for Today
With ½–2 ½ in. working range, ESCO Electric C-MILLHOG® OD Clamping End Prep Tool is suitable for prepping stainless steel and most hard-to-machine alloys. Clamp grips tubing from outside, evenly distributing holding power, to ensure chatter-free, precision end prep on both thin- and heavy-wall tubes. Suited for use on high-purity piping systems requiring 37½° bevels, flat-facing, J-preps, or orbital welding, tool comes equipped with ratchet feed that provides over 1 in. of stroke. This story is related to the following:Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes AdTube Fabrication Tools | Pipe End Preparing Machinery |
Kurt Hydraulic Clamping Systems & Hydraulic Pumps Ideal for High Production Machining ...
2013-08-22 06:00:00| Industrial Newsroom - All News for Today
FREE New 20-Page Catalog – Call 1-877-226-7823<br /> <br /> Minneapolis, Minnesota: Kurt's Hydraulic Clamping Systems speed the part clamping process in machining centers with accuracy and less effort. These Kurt Systems locate and clamp workpieces in seconds for high precision repeatability while increasing machine output<br /> <br /> This new Kurt product line provides a wide range of Swing Clamps, accessories and hydraulic pump options for configuring the right workholding system for ...This story is related to the following:Fluid and Gas Flow Equipment Sponsored by: PARKER / AUTOCLAVE ENGINEERS FCD - mobile bannerSearch for suppliers of: Clamping Systems | Electric Pumps | Hydraulic Pumps
Tags: high
systems
production
ideal
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] next »