je.st
news
Tag: accelerometers
Piezoelectric Accelerometers are suited for vibration work.
2013-07-12 14:31:27| Industrial Newsroom - All News for Today
Standard size 3000 Series accelerometers include models with all-welded construction that are hermetically sealed. Along with complete mechanical isolation of sensing element, features include self-generating signal and design insensitive to mounting torque, body strains, cable vibration, cable whip, pressure variations, and heat transients. Smaller and lighter 5000 Series shares same characteristics of standard units but can obtain higher natural frequencies and shock levels. This story is related to the following:Piezoelectric Accelerometers
Tags: work
suited
vibration
piezoelectric
DC MEMS Shock Accelerometers support automotive crash testing.
2013-07-02 14:30:52| Industrial Newsroom - All News for Today
Available in damped and undamped versions, PCB® Series 3641 and 3651 are designed for applications that require small mass and broad frequency response, such as crash testing, drop testing, and sled testing. Both offer 2,000 G full-scale measurement range with mechanical overload limit stops, and frequency range of 0–5,000 Hz. Designed with standard low transverse sensitivity and standard low zero G offset, units meet SAE J211 and SAE J2570 specifications. This story is related to the following:Sensors, Monitors and TransducersSearch for suppliers of: Shock Sensors | Microelectromechanical Systems (MEMS) Test Equipment
Tags: support
automotive
testing
shock
Piezoelectric Accelerometers are suited for vibration/shock work.
2013-06-28 14:32:17| Industrial Newsroom - All News for Today
Comprised of standard size units, 3000 Series includes models with all-welded construction that are hermetically sealed for use in dirty and humid environments. Piezoelectric seismic system provides complete mechanical isolation of sensing element, and signal is self generating – no external power source is required. High-temperature versions are available. Smaller and lighter than standard units, 5000 Series allows higher natural frequencies and shock levels to be obtained. This story is related to the following:Piezoelectric Accelerometers | Accelerometers
Tags: work
suited
piezoelectric
accelerometers
High Temperature Accelerometers suit areas up to 900°F.
2013-06-07 14:30:28| Industrial Newsroom - All News for Today
Suited for vibration measurement in gas turbines, Series EX600B13 features one-piece construction with 10 ft hermetically sealed integral hard-line cable. By coupling sensor, cable, and charge amplifier in single assembly, gas turbine operators have complete measuring chain that eliminates contamination and common mode noise concerns. Models EX600B13 and EX600B14 feature frequency range of 282–240,000 cpm (4.7–4,000 Hz), and have sensitivity of 100 mV/g and 10 mV/g, respectively. This story is related to the following:Accelerometers
Tags: high
areas
temperature
suit
High-Temperature Accelerometers suit gas turbine applications.
2013-04-11 14:29:52| Industrial Newsroom - All News for Today
Along with respective sensitivities of 100 and 10 mV/g, EX600B13 and EX600B14 have frequency range of 282–240,000 cpm (4.7–4,000 Hz) and are suited for vibration measurement in areas of up to 900°F. Single assembly design – 10 ft, hermetically sealed, hard-line cable; side-exit charge mode sensor; and inline charge amplifier – eliminates contamination and common mode noise concerns. Drop-in replacement for existing accelerometers is made possible via ARINC® 3-point mounting bases. This story is related to the following:Accelerometers |
Tags: applications
gas
suit
turbine