Home conductive
 

Keywords :   


Tag: conductive

Conductive Adhesive suits die attach applications.

2014-01-10 14:30:44| Industrial Newsroom - All News for Today

Designed for lead-frame die attach applications in semiconductors, circuit assembly, photonics, or camera modules, CA-175 Snap Cure Conductive Adhesive has moderate glass transition temperature (Tg) and modulus. Rheology is optimized for needle dispensing by time-pressure, auger, or positive displacement. Able to achieve full cure in 8 sec at 200°C, adhesive is modified to provide conductivity stability during damp heat testing on tin, silver, and copper surfaces. This story is related to the following:Electrically Conductive Adhesives

Tags: die applications attach suits

 

Dimensionally Stable Two Component Urethane Modified Epoxy Gel Is Thermally Conductive

2014-01-06 06:00:00| Industrial Newsroom - All News for Today

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a  soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics.<br /> <br /> With a low hardness of 20-30 Shore A, Super Gel 9AO is able to encapsulated sensitive electronic components. ...This story is related to the following:Epoxies | Gels

Tags: modified component stable gel

 
 

Non-Sag, Thermally Conductive Epoxy Adhesive

2013-12-16 06:00:00| Industrial Newsroom - All News for Today

With thick paste consistency, Epoxyset's EB-403-1LV-T1 bonds to diverse substrates including metals, composites, glass, ceramics, rubbers, plastics and will not run or sag even when applied to vertical surfaces even at elevated temperatures. Bonds resist thermal cycling, autoclave, as well as chemicals, including water, oils, fuels, acids, bases, and salts. This one component epoxy requires no weighing or mixing and is available in ready to use 10oz cartridges. EB-403-1LV-T1 cures rapidly at ...This story is related to the following:Thermally Conductive Adhesives | Epoxies | Epoxy Adhesives |

Tags: adhesive epoxy conductive thermally

 

Thermally Conductive Plastics target LED applications.

2013-12-13 14:28:09| Industrial Newsroom - All News for Today

While meeting UL94 V-0 flame resistance requirement, LUVOCOM® thermally conductive and electrically insulative materials are characterized by thermal conductivity from 0.6&ndash;1.5 W/mK, impact strength up to 14 lb ft/in.², and tensile strength up to 8,000 psi. Typical materials use base polymers PET and PA 6, which meet application requirements, extend component service life, and exhibit processing characteristics that enable injection molding of complex geometries and thin wall sections. This story is related to the following:Polyethylene |

Tags: applications led target plastics

 

Saint-Gobain's CarboTherm(TM) Boron Nitride Fillers for Thermally Conductive, Dielectric ...

2013-12-02 06:00:00| Industrial Newsroom - All News for Today

Amherst, NY &ndash; Saint-Gobain Ceramic Materials, a pioneer in advanced material solutions, announced today that its range of CarboTherm&trade; boron nitride thermal management fillers will be on display at the upcoming Compounding World Forum 2013, December 10-11, Booth #2, Hilton City Avenue, Philadelphia.<br /> <br /> CarboTherm Boron Nitride fillers enable manufacturing of thermally conductive, dielectric plastic compounds, allowing compounders to enter new markets for injection molded ...This story is related to the following:Materials and Material ProcessingInsulation Fillers | Boron Nitride |

Tags: dielectric conductive thermally boron

 

Sites : [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] next »