AirLoc engineering was contacted to make a recommendation for vibration isolation on a large municipal water district engine/pump system in Sothern California. The 9,000 lb. system was supported on a 3/4 inch steel plate using 6 mounting feet. After initially testing a "soft" pad configuration with too much defection, 715 damping pads and iso-washers were evaluated with a bolt-through configuration as shown in the layout below. Jeff Davis, Industrial Engines Supervisor, made the following ...This story is related to the following:Controls and ControllersMounting and Attaching ProductsSearch for suppliers of: Vibration Absorbing & Isolating Pads | Vibration Dampers | Vibration Dampeners |