je.st
news
Tag: converter
Current to Voltage Converter is ready for analog ASIC integration.
2014-01-31 14:31:50| Industrial Newsroom - All News for Today
Using Transimpendance Amplifier architecture with 8 digitally programmable current ranges from 8 µA to 1 mA, SCi310 Analog Front End IP block converts current captured from sensor system to fully differential output voltage that is ready to be amplified. Precision I/V converter block maintains constant voltage at input pin for all operating modes and input currents while enhancing linearity and keeping offset low using Auto Zeroing offset cancellation circuit applied via digital signal. This story is related to the following:Current-To-Current Converters |
Tags: current
ready
integration
converter
Signal Converter offers dimming control for 80 fixtures.
2014-01-27 14:31:31| Industrial Newsroom - All News for Today
Extracting dimming levels and address information from incoming DALI data, Model DAP-04 controls each of 4 PWM dimming outputs individually. Each channel can drive PWM input of any MEAN WELL LED power supply equipped with 3-in-1 dimming function. Model DAP-04 offers 1–100% dimming range, and choice of linear or logarithmic dimming curves which comply with IEC62386-207. Built-in relay and contact is provided for ON/OFF control of AC LED power supply. This story is related to the following:Signal Converters |
Tags: control
offers
signal
converter
Horlick Ships a Motor-Generator Set Used as a 60 Hz to 50 Hz Frequency Converter.
2014-01-20 06:00:00| Industrial Newsroom - All News for Today
Randolph, MA — The Horlick Company, Inc. recently shipped a motor-generator set used as a 60-50 Hz frequency converter to an American manufacturer who supplies equipment to the mining and oil industry.<br /> <br /> The frequency converter shipped was a Horlick Model 50SC-303. It is rated at 37.5 KVA and will be used to convert 60 Hz power available in the customer's facility to the 50 Hz power required to test their products prior to shipment overseas. This particular motor-generator set ...This story is related to the following:Test and Measuring InstrumentsSearch for suppliers of: Frequency Converters
HP Fiber to RS232 Converter offers 120 Kbps data transfer rate.
2014-01-17 14:32:39| Industrial Newsroom - All News for Today
Providing electrical-to-optical and optical-to-electrical conversion, Model 4139 is used to connect fiber optic linked terminals to controller with RS232 interface port. Unit uses DB9 connector for RS232 connection and provides full galvanic isolation between connected devices. Maximum link distance is greater than 1,640 ft with 2.00 mm hard clad silicon fiber cable. Measuring 5.5 x 2.25 x 1.0 in., converter includes red LED status display and 120 Vac, 60 Hz external wall-mount power supply. This story is related to the following:Optics and PhotonicsInterface Converters | Media Converters
Tags: data
rate
offers
transfer
RS422/USB converter lets computers accommodate optical sensors.
2014-01-17 14:32:38| Industrial Newsroom - All News for Today
Four-channel IF2004/USB lets lab PCs, company laptops, or computers without RS422 industrial interface evaluate readings from laser and confocal sensors. Able to convert digital signals from up to 4 optical sensors into USB data packet, product also ensures synchronous data acquisition for defined temporal allocation of four RS422 inputs. Converter has 4 trigger inputs and one trigger output for connecting additional converters. Connected sensors and converter are programmable via software. This story is related to the following:Universal Serial Bus (USB) Adapters
Tags: computers
optical
converter
accommodate
Sites : [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] next »