je.st
news
Tag: xmc
XMC Mezzanine Module supports reconfiguration by user.
2015-06-22 14:31:06| Industrial Newsroom - All News for Today
Able to be reconfigured via direct download into Flash configuration memory over PCIe bus or JTAG port, XMC-7A200 serves as co-processor applying custom logic and algorithms to streams of remote sensor data. Features include Xilinx® Artix®-7 FPGA and 128M x 16-bit Quad DDR3 SDRAM as well as 4-lane high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial RapidI/O, and Xilinx Aurora implementations. Rear I/O and other build options are also available.
Tags: user
supports
module
mezzanine
Conduction Cooled XMC Card enhances COTS data recorders.
2015-04-30 14:31:06| Industrial Newsroom - All News for Today
Optimized for use with Curtiss-Wright COTS data recorders, Universal Capture Card (UCC) captures sFPDP, GbE, and 10GbE data while also providing time stamping and channel synchronization to ensure accurate data recording and playback. This conduction-cooled capture XMC (VITA 42) card, suited for use with rugged deployed aerospace and defense applications, accelerates and simplifies integration of high-speed, multi-channel data capture/recording of sensor data in airborne and ground vehicles.
Tags: data
card
enhances
recorders
Rugged XMC Graphics Module combines low power, high performance.
2015-04-20 14:31:07| Industrial Newsroom - All News for Today
Based on 3U VPX VPX3-716 Graphics Engine (AMD Radeon™ E8860 GPU-based display card), XMC-725 delivers multiple independent channels (up to 4 heads) of graphics output: DVI/LVDS/RGB-HV/DisplayPort™. Performance is optimized over -40 to +85°C basecard edge temperature, and 2 GB dedicated onboard memory supports demanding applications. Requiring <17 W, SWaP-optimized design eliminates need to throttle performance and unwanted shutdowns. Applications may only require as little as 10 W draw.
Tags: high
power
low
performance
Adaptive IF Relay XMC aids commercial, military communications.
2015-04-06 14:31:06| Industrial Newsroom - All News for Today
Accepting 2 IF (Intermediate Frequency) analog input channels, Cobalt® Model 71624 modifies up to 34 signals, and then delivers them to 2 analog IF outputs. Any signal within each IF band can be independently enabled/disabled and changed in both frequency and amplitude. XMC features Virtex-6 FPGA and 34 independently tunable DDCs and supports such functions as signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation.
Tags: commercial
communications
military
aids
Two-Channel Adaptive IF Relay XMC aids signal manipulation.
2015-03-26 13:31:08| Industrial Newsroom - All News for Today
Preconfigured with IP functions for DDC, DUC, DMA transfers, and digital summation, Cobalt® Model 71624 with Virtex-6 FPGA accepts 2 IF analog input channels, modifies up to 34 signals, and delivers them to 2 analog IF outputs. Any signal within each IF band can be independently enabled/disabled and changed in frequency/amplitude. Functions include signal drop/add/replace, frequency shifting/hopping, amplitude equalization, and bandwidth consolidation.
Tags: aids
signal
manipulation
relay