je.st
news
Tag: jaw
Pull-Type Vise clamps large parts with minimal jaw deflection.
2014-02-04 14:31:02| Industrial Newsroom - All News for Today
With jaw plates in standard position, HD690 features full 9 in. opening. Combination of AngLock® and pull-type designs reduces stress in vise body under load, promoting clamping accuracy. Jaw is rigid and stationary, top-down bolting reduces deflection, and body height reduces clamping stress. Offering clamping force from 975–5,250 lb using 10–80 lb input torque, vise features precision roller bearings and hardened vise screw mechanism that lend to precision clamping and smooth operation. This story is related to the following:Adjustable Jaw Vises |
Tags: large
parts
minimal
vise
Parallel Pneumatic Grippers offer jaw travels to 4.921 in.
2013-11-08 14:32:17| Industrial Newsroom - All News for Today
Available in 4 sizes, Series GRH incorporates extended support guide system with wide slot jaws that minimize tooling deflection, support large moment capacities, and provide side load stability. Dual bore provides high total grip force, while low breakaway pressure allows for gripping of wide variety of part sizes, including delicate parts. Featuring integrated shock pads and hard-coated aluminum body for corrosion resistance, grippers are suitable for harsh environments. This story is related to the following:Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving TechnologiesSearch for suppliers of: Grippers
Tags: offer
parallel
travels
jaw
Sliding Jaw Air Chuck delivers 0.0001 in. TIR.
2013-10-14 14:29:32| Industrial Newsroom - All News for Today
Along with quick-change jaws and hard stop, 3-jaw Model 650 features 0.0001 in. TIR, 0.100 in. max jaw opening, and 988 lb force per jaw. Subjaws are permanently mounted to chuck's master jaws, and Quick-Change top jaws are held in place by one bolt through keyhole slot in each jaw pad. Weighing 14 1/8 lb with aluminum jaws or 14 7/8 lb with steel jaws, chuck offers repeatability of 0.000025 in. (max concentricity).<br /> This story is related to the following:Air Chucks
Tags: air
delivers
chuck
sliding
Clamping Force Block offers flexible chuck jaw monitoring.
2013-09-25 14:30:43| Industrial Newsroom - All News for Today
With one-piece rigid base body, wedge hook kinematics, and long ground jaw guides, TANDEM KSP plus provides concentrated clamping forces up to 55 kN with repeat accuracy up to 0.01 m. Whether using ID or OD clamping, opened or clamped positions for any base jaw position can be adjusted. Monitoring is done via 2 inductive proximity switches, which are integrated in recesses in base jaws. Optimized outside contour and minimum gaps prevent build-up of dust pockets or chips. This story is related to the following:Clamp Blocks
Tags: offers
force
block
monitoring
Power Chuck features quick change jaw set.
2013-08-19 14:27:36| Industrial Newsroom - All News for Today
With ROTA THWplus, complete jaw set can be changed in less than 60 seconds with repeatability of less than 0.0005 in., eliminating need to re-bore jaws. Wedge-bar actuation system allows chuck to offer large through holes with fast spindle speeds, coupled with Quick-Jaw-Change-System. Offered in 165, 185, 215, 260, and 315 sizes, ROTA THWplus is available with selection of modular sleeves for through spindle coolant, part ejection, closed center sealing, or as adjustable part stop. This story is related to the following:Quick Change Chucks |
Tags: set
change
power
features