je.st
news
Tag: component
Component Test Engineer
2019-01-22 17:30:37| Space-careers.com Jobs RSS
Component Test Engineer Deadline for applications 15022019 Client and Location The European Space Agency is ATGs biggest client. They are an international organisation with 22 member states with sites in the Netherlands, Germany, Spain, France, Italy, UK and Belgium. ESA is Europes gateway to Space! Job Description For one of our main clients ESAESTEC we are currently looking for a Component Test Engineer for their location in Noordwijk, The Netherlands, supporting the Rad.Hard.Ass. Comp. Analysis Section. Tasks and Responsibilities Provide support to the Space Component Evaluation and Radiation Effects Section for the preparation and implementation of environmental and reliability tests of EEE components in accordance with established standards and laboratory procedures Support the update and definition of new relevant test standards, test methods, laboratory procedures and ancillary documentation as required The implementation and configuration of radiation test setups hardware and software for radiation effects testing e.g. Total Ionising Dose Co60, Single Event Effects, Displacement Damage, etc. of components, test structures or electronic assemblies The support of radiation tests performed in ESTEC or external radiation facilities The support of radiation test data analysis and result reporting The support of activities related to the development, implementation and verification of radiation monitors, instruments and inorbit technology test beds radiation flight experiments The provision of expert support concerning national and international regulations applicable to the operation of radiation sources for research purposes The support of administrative activities in terms of site safety and security matters concerning internal radiation test facilities, document handling distribution, archiving, etc. and such related to the maintenance of the radiation effects test report database and internet homepage Support to ISO accreditation accreditation activities of the 60Co and CASE facility Provide support to the Space Component Evaluation and Radiation Effects Section by preparing, participating, executing irradiation test campaigns for Total Ionising Dose TID, Displacement Damage DD and Single Event Effect SEE radiation testing of EEE components Provide expertise in the field of Discrete and Complex Digital and Mixed Signal Semiconductor components Carry out functional and parametric electrical testing and analysis tasks, particularly concerning Discrete and Complex Semiconductor components Perform test preparations including data sheetspecification analysis, determine and create the required test setup in hardware design and adaptation of test boards and jigs, and software incl. test pattern definitiongeneration for the test systems used Plan and implement reliability tests environmental, endurance, stress, ESD, etc. Perform selected tasks concerning the installation and upkeep of laboratory equipment and software. Undertake other physical analysis and test tasks as required Contribute to the assessment of test methods, test flows, test programmes, test equipment and the planning of relevant laboratory investments. Requirements PhD or MsC in Electrical Engineering, Physics or related specialisation with a minimum of 4 years of work experience Good overall knowledge of semiconductor technologies in terms of process, production, testing, component design, component types, component application and reliability Practical experience in the use of laboratory equipment such as parameter analysers, logic analysers, data loggers, VLSI testers, writing and adapting test SW for SZ and similar test system Demonstrated background and experience in EEE component technologies in terms of constituent materials, production technology, test equipment, test tools, test methods and standards industrial and standardisation bodies, laboratory techniques, laboratory equipment, laboratory work and procedures including common health and safety regulations and in particular those related to Radiation Testing Knowledge of programming language Labview, Python, C,.. Knowledge of radiation effects in electronic components is a plus. What do we offer? ATG offers excellent working conditions and provide you with all the other necessary means to further your career. We believe that training and education, combined with regular assessments and a personal development plan, will create the best environment for growth. If needed, we also assist you with settling in your new home or finding the right school for your children. ATG will help in any way it can, including a relocation budget that is applicable for ATG staff as well as employees working at one of our clients. About ATG Europe Today, ATG is recognized as a leading provider of specialized engineering, scientific and technical services to the European Space industry. Our headquarters is located in Noordwijk, the Netherlands and we have subsidiaries in Germany and the UK. Besides these countries, ATG also operates in Belgium, Sweden and Norway. ATG People is the key player in delivering highly educated personnel for RD environments throughout Europe. We are continually recruiting experienced Engineers for exciting, fulltime positions based at our customers sites. As an ATG Engineer, you will be working on very diverse missions and assignments. This opens up unique opportunities to be engaged in innovative projects and challenging you to perform to high standards and utilizing the full extent of your professional knowledge. Interested? Submit your CV and personal details through our website at www.jointhebrightestminds.com or send your application directly to our recruitment consultant Estefania Ochoa at estefania.ochoaatgeurope.com. For further questions, you can also contact Estefania directly on phone number 31 071 579 55 51.
Tags: test
component
engineer
test engineer
Component Test Engineer
2019-01-22 17:30:37| Space-careers.com Jobs RSS
We are looking for a Component Test Engineer E3 to join our Modis Aerospace team, working onsite at the European Space Agency in the Netherlands. Modis Aerospace is a specialized Engineering consultancy with more than 30 years experience providing aerospace Engineers to our key partners in The Netherlands. Modis is a longstanding business partner of the European Space Agency ESA, with more than 120 employees recruited from across Europe currently supporting ESAs activities. Specific tasks to be performed Provide support to the Space Component Evaluation and Radiation Effects Section by preparing, participating, executing irradiation test campaigns for Total Ionising Dose TID, Displacement Damage DD and Single Event Effect SEE radiation testing of EEE components. Provide expertise in the field of Discrete and Complex Digital and Mixed Signal Semiconductor components. Carry out functional and parametric electrical testing and analysis tasks, particularly concerning Discrete and Complex Semiconductor components. Perform test preparations including data sheetspecification analysis, determine and create the required test setup in hardware design and adaptation of test boards and jigs, and software incl. test pattern definitiongeneration for the test systems used. Plan and implement reliability tests environmental, endurance, stress, ESD, etc.. Perform selected tasks concerning the installation and upkeep of laboratory equipment and software. Undertake other physical analysis and test tasks as required. Contribute to the assessment of test methods, test flows, test programmes, test equipment and the planning of relevant laboratory investments. General tasks to be performed Support the update and definition of new relevant test standards, test methods, laboratory procedures and ancillary documentation as required. The support of radiation tests performed in ESTEC or external radiation facilities. The support of radiation test data analysis and result reporting. The support of activities related to the development, implementation and verification of radiation monitors, instruments and inorbit technology test beds radiation flight experiments. The provision of expert support concerning national and international regulations applicable to the operation of radiation sources for research purposes. The support of administrative activities in terms of site safety and security matters concerning internal radiation test facilities, document handling distribution, archiving, etc. and such related to the maintenance of the radiation effects test report database and internet homepage. Support to ISO accreditation accreditation activities of the 60Co and CASE facility. To successfully perform the above mentioned tasks, the following background experience is required PhD or Msc in Electrical Engineering, Physics or related specialization. Knowledge of programming language Labview, Python, C etc.. Knowledge of radiation effects in electronic components is a plus. Good overall knowledge of semiconductor technologies in terms of process, production, testing, component design, component types, component application and reliability. Practical experience in the use of laboratory equipment such as parameter analysers, logic analysers, data loggers, VLSI testers, writing and adapting test SW for SZ and similar test system. Demonstrated background and experience in EEE component technologies in terms of constituent materials, production technology, test equipment, test tools, test methods and standards industrial and standardisation bodies, laboratory techniques, laboratory equipment, laboratory work and procedures including common health and safety regulations and in particular those related to Radiation Testing. About ESAESTEC The European Space Agency ESA has sites in several European countries. The European Space Research and Technology Centre ESTEC is the largest site and the technical heart of ESA. This nursery of European space activities is located in Noordwijk, Netherlands. At ESTEC, about 2500 engineers, technicians and scientists work handson with mission design, spacecraft and space technology. Almost all ESA projects except launchers are managed from ESTEC. In Noordwijk, people work on science missions, manned space missions, Earth observation, telecommunications and navigation satellites. ESTEC provides extensive testing facilities to verify the proper operation of spacecraft, such as the Large Space Simulator LSS, acoustic and electromagnetic testing bays, multiaxis vibration tables and the ESA Propulsion Laboratory EPL. Please send your CV to recruitmentaerospacemodis.com before 15022019
Tags: test
component
engineer
test engineer
EEE Component Engineer
2018-12-20 15:30:10| Space-careers.com Jobs RSS
EEE Component Engineer, Ref no 1917986 Terma The hightech and innovative Terma Group develops products and systems for defence, nondefence and security applications, including command and control systems, radar systems, selfprotection systems for aircraft and vessels, space technology, and aerostructures for the aircraft industry. Terma is headquartered at Aarhus, Denmark. Internationally, Terma has subsidiaries and operations in The Netherlands, France, Germany, United Kingdom, United Arab Emirates, India, Singapore and the U.S. The Space Business Area contributes with missioncustomized software and hardware products including power systems and star trackers as well as services to support a number of inorbit pioneering European scientific and Earth observation satellite missions. Additionally, Terma is contracted for the development and delivery of software and hardware systems and services for numerous ongoing and future European, and international missions. Terma Space operates out of Denmark, The Netherlands, France, Germany, the UK and France. Job description For our customer, the European Space Agency ESA, we are seeking an experienced EEE Component Engineer to work at ESAs ESTEC site in Noordwijk, The Netherlands. Responsibilities You will be assigned to ESAESTECs Components Standardization and Qualification Section within the Directorate of Technical and Quality Management. The activities to be performed cover Electrical characterisation and measurements over temperature range digital, analog, microwave. Surface analysis Scanning Electron Microscope SEM, Energy Dispersive Analysis EDA by XRay, Wavelength Dispersive Analysis WDA by XRay, Focussed Ions Beam Milling FIBM and deposition, Electron Spectroscopy for Chemical Analysis ESCALAB, Optical Techniques, Raman Spectroscopy. Thermography infrared microscopy. Chemical processing Potting, Etching, Sectioning. Radiation effects Support to irradiation test campaigns in terms of HW and SW test setup preparation and verification for TID by Gammabeam Co60 and XRay, Single Event Effects by Californium and Heavy Ion beams, Displacement Damage, and emerging methods. Reliability testing environmental, life tests, etc. Thermal, mechanical, Partial Impact Noise Detection PIND, Leak testing, Bond strength, Electrostatic Discharge ESD, Burnin. Use of the laboratories own analysis equipment and of other internalexternal facilities to perform Failure Analysis and evaluation task for component qualification. Design and implementation of adapted test setups in HW and SW. Proficiency in reporting on tasks and analysis results in English Language. Support to ISO accreditation certification activities. Support to departmental QMS activities within the scope of the specific tasks. In addition, you will be required to support auditing of component manufacturers and engineering support to the European Space Components Coordination ESCC standardization and qualification program. This is a fulltime position located at ESTEC, Noordwijk, The Netherlands. The requested start of work is February 2019 or as soon as possible thereafter. Qualifications Competencies The successful candidate shall have A PhD or Masters Degree in Electrical Engineering, Physics or related specialization. At least 4 years relevant industrial working experience. A demonstrated background and experience in EEE component technologies in terms of constituent materials, production technology, test equipment, test tools, test methods and standards industrial and standardisation bodies. Experience with laboratory techniques, laboratory equipment, laboratory work and procedures including common health and safety regulations. Proficiency in at least 4 of the following fields Passive Components Discrete Semiconductors for RF and nonRF Complex Microcircuits for Digital, Analog, Mixed Signal and Microwave Hybrid Technology Micropackaging Optoelectronics Prior experience with space specific effect and analysis would be an advantage. What can Terma Offer? At Terma, we consider skilled employees, enthusiasm and job satisfaction as the very foundation of our success and as a prerequisite for the development of the bestinclass solutions that Terma provides. We lead the way in applying new technology, offering a wide range of growth opportunities for each individual and emphasizing mutual respect across the board in our workplace. Terma offers you a pleasant working environment at the customer site, where you will be able to take on challenging tasks and responsibilities in a highly professional company. Great opportunities for training and personal development Challenges in advanced technical environment International and cosmopolitan working atmosphere An employment contract with an attractive package with extralegal benefits Highly competitive salary Support on relocation if applicable Recruitment is depending on successful selection by the customer. Additional information To ensure that your application will reach us and is properly processed, please apply exclusively through our website httpwww.terma.comcareersjobs and upload a cover Letter explaining your background and expertise, as well as your earliest date of availability, and an uptodate Curriculum Vitae. For further information, please contact Mr. Simon Mills by email recruitment.nlterma.com. Closing date January 16th 2019 Please note the following Legal Security requirements Applicants must hold all appropriate permits to work in the EU. Applicants are required to provide a copy of their IDpassport and degreehigher education certificate. Terma will validate the certificate with the issuing authority. A Certificate of Good Conduct or equivalent will be applied for at commencement of employment. Privacy Notice By submitting your job application you confirm that you have read, understood and accepted this Privacy Notice, including Termas Privacy Policy as referenced below and are providing your consent to Termas storage and processing of your personal data accordingly. This Privacy Notice covers any personal data you submit to Terma for the recruiting process, including e.g. Your name, contact details and application status Information included in your CV or cover letter, such as job history, academic background, skills and competencies, personal interests, languages spoken, and your photo Job preferences and type of employment sought Names and contact details for references Please visit our Privacy Policy at www.terma.com. Here you will find additional information about our compliance with GDPR, how we use and protect your data, as well as information about your rights pursuant to GDPR. You will also find information who to contact at Terma in case you
Tags: component
engineer
eee
component engineer
Component Engineer
2018-12-19 15:33:13| Space-careers.com Jobs RSS
We are looking to further enhance our team by adding an Component Engineer You will be based at our clients premises in Noordwijk, Netherlands. In this large European Agency you will find an excellent and modern working environment with challenging tasks and responsibilities. Your Tasks Include The general responsibilities of the engineer will be as follows Provide expertise in the field of Passive Components, Discrete Semiconductors for RF and nonRF, Complex Microcircuits for Digital, Analog, Mixed Signal and Microwave, Hybrid Technology, Micropackaging, Optoelectronics proficiency in at least 4 of the previous 12 categories is required. Auditing of component manufacturers and engineering support to the ESCC standardization and qualification program. Carry out Failure Analysis tasks and other analysis tasks as required. Prepare reports on the analysis tasks as required. Support and advice concerning the performance of analysis tasks subcontracted to external laboratories. Provide related technical support on EEE components to ESA projects and other DTEC divisions in the area of hybrid technology. Provide technical assistance in the definition and to the management of ESA Technology programmes in the field of hybrid technology. Provide technical input to the formulation, review and maintenance of the technical standards and specifications relating to the evaluation and capability approval of hybrid manufacturers. Provide technical assistance in the formulation and monitoring of Capability Approval programmes for hybrid manufacturers. Support ISO certification activities. Your Profile The successful candidate should have the following qualifications and experience PhD or MSc in Elec Engineering, Physics or related specialization At least 4 years of relevant work experience Fluent in English knowledge of another ESA memberstate language is an asset Proactive attitude to solving problems Good organisational skills. Candidates must be eligible to work in the EU REFERENCE RTCTECQES00494 LOCATION Noordwijk, Netherlands CONTACT recruitmoltek.com CLOSING DATE 18th January 2019 MOLTEK has been serving the space and aerospace industries since 1995, providing international consultancy services for a wide variety of clients from private and public corporations to national and international authorities and agencies. For more detailed information about MOLTEK go to www.moltek.com
Tags: component
engineer
component engineer
Component Engineer
2018-12-19 11:30:00| Space-careers.com Jobs RSS
Summary An opportunity for an experienced Component Engineer to provide support onsite at ESTEC for Telespazio VEGA. Objective To provide expert support to ESA projects in EEE components, contributing with proven proficiency in at least four of the following fields Passive Components, Discrete Semiconductors for RF and nonRF, Complex Microcircuits for Digital, Analog, Mixed Signal and Microwave, Hybrid Technology, Micropackaging, Optoelectronics and MicroNanoSystems. Responsibilities Duties Duties will include but are not limited to Auditing of component manufacturers and engineering support to the ESCC standardization and qualification program. Carry out Failure Analysis tasks and other analysis tasks as required. Prepare reports on the analysis tasks as required. Support and advice concerning the performance of analysis tasks subcontracted to external laboratories. Provide related technical support on EEE components to ESA projects and other DTEC divisions in the area of hybrid technology. Provide technical assistance in the definition and to the management of ESA Technology programmes in the field of hybrid technology. Provide technical input to the formulation, review and maintenance of the technical standards and specifications relating to the evaluation and capability approval of hybrid manufacturers. Provide technical assistance in the formulation and monitoring of Capability Approval programmes for hybrid manufacturers. Support ISO certification activities. Qualifications Experience PhD or MSc in Electrical Engineering, Physics or related specialization. At least 4 years of relevant work experience. Proficiency in at least four of the following fields Passive Components, Discrete Semiconductors for RF and nonRF, Complex Microcircuits for Digital, Analog, Mixed Signal and Microwave, Hybrid Technology, Micropackaging, Optoelectronics and MicroNanoSystems. Demonstrated background and experience in EEE component technologies, in terms of production technology, test equipment, test tools, test methods and standards, laboratory work and procedures. Essential Skills Good English language skills Excellent communication and presentation skill Excellent analytical skills High standard of document drafting Ability to work effectively both within a small team and in an autonomous way Qualities Positive, cando approach to solving problems. Further Details All roles within Telespazio VEGA have a defined closing date, however if a successful candidate is found before the advert expires the role will be closed early. We would therefore advise any candidate to apply as early as possible to avoid disappointment. Closing Date 15th January 2019. Location ESTEC, Noordwijk, The Netherlands. Benefits Competitive Package Security In line with Asylum Immigration Legislation, all applicants must be eligible to live and work in the EU. Documented evidence of eligibility will be required from candidates as part of the recruitment process. Furthermore, in view of the nature of the work the company is in, all potential employees will undergo stringent reference and identity checks. To apply Please send your CV and covering letter to careerstelespazio.com By sending your CV to careerstelespazio.com you give your consent for Telespazio VEGA to hold and process your personal information for the purpose of the application.
Tags: component
engineer
component engineer
Sites : [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] next »