je.st
news
Tag: system software
System and Software Engineer LISA Pathfinder SCJ 2700
2013-07-19 18:36:09| Space-careers.com Jobs RSS
Summary To support the Science and Technology Operations Centre of the Lisa Pathfinder mission, a technology demonstrator for the LISA mission. Objective The Science and Technology Operations Centre STOC is the point of interface to the scientific community, and is responsible for the payload scheduling, quicklook data analysis, data processing and archiving. The engineer will be developing this infrastructure. Responsibilities Duties 1. Activities during the development phase a STOC system engineering Define and maintain the toplevel system design of the Science Operations Ground Segment in the different mission phases Support the definition of the interfaces between the STOC and the MOC and the writing maintenance of the STOCMOC ICD Define the interfaces between the STOC and the LTP DRS and write the STOCLTP and STOC DRS ICDs Write the STOC Operations Plans Write the STOC Operations Procedures b STOC SW development Monitor the development of the software modules e.g. Mission Planning, Data Ingestion, Simulator, Be responsible of the installation of these tools and their configuration control at STOC Perform their acceptance tests. c STOC integration Ground Segment Tests The Operations Engineer will provide service support for the definition, preparation and execution of the STOC integration tests, the Ground Segment tests SOVTs and the STOC Simulations Prepare test plans, test data and procedures to applied during these tests 2. Activities during the operational phase a STOC System Engineering Maintenance of the interfaces between the STOC and the MOC, LTP DRS and their relevant ICDs Maintenance of the STOC Operations Plans Maintenance of the STOC Operations Procedures b STOC operational duties Generate the operational payload mission planning files to be sent to the MOC Monitor the data ingestion tasks that will receive the telemetry and auxiliary data from MOCs Data Disposition System Support the data archiving tasks that will populate the archive Support the investigation of payload anomalies and the implementation of the recovery c STOC SW maintenance The service provided by the Operations Engineer will cover the monitoring of the maintenance of the software modules and provide to the developers the priorities for the resolution of the software problems as seen from the users side. The service provided by the Operations Engineer will cover being responsible for the installation of these tools and their configuration control at STOC. Qualifications Experience University degree or equivalent in a related field Experience needed in the development, testing and operations of a scientific operations centre or a similar system Good Knowledge and understanding of SCOS Database Experience Experience in satellite payload operations Software skills JAVA, MATLAB, Perl and C Essential Skills The selected contractor must have good interpersonal and communication skills to interact with a number of external people Desirable Skills Operations of scientific satellites and in particular of LISA Pathfinder or its payload would be an asset Further Details All roles within Telespazio VEGA have a defined closing date, however if a successful candidate is found before the advert expires the role will be closed early. We would therefore advise any candidate to apply as early as possible to avoid disappointment. Closing Date for applications is 5th August 2013. Location of the position is ESAC, near Madrid. Benefits Competitive salary plus a comprehensive benefits package including holiday Security In line with Asylum Immigration Legislation, all applicants must be eligible to live and work in the EU. Documented evidence of eligibility will be required from candidates as part of the recruitment process. Furthermore, in view of the nature of the work the company is in, all potential employees will undergo stringent reference and identity checks.
Tags: system
software
lisa
engineer
Robotics System and Software Engineer
2013-07-18 19:38:07| Space-careers.com Jobs RSS
Directorate of Technical and Quality Management The European Space Agency is an equal opportunity employer and encourages applications from women POST Robotics System and Software Engineer in the Automation and Robotics Section, Mechatronics and Optics Division, Mechanical Engineering Department, Directorate of Technical and Quality Management. This post is classified in the A2A4 grade band of the Coordinated Organisations salary scale. LOCATION ESTEC, Noordwijk The Netherlands. DUTIES The holder of this post will report to the Head of the Automation and Robotics Section and shall work in the ESA Telerobotics and Haptics Laboratory within the following domains generic systems and technology development of robotic, telerobotic and mechatronic components robotic and mechatronic software systems, such as highlevel and lowlevel software for control, coordination and implementation of robotic, telerobotic and mechatronic systems interacting for manipulative, relocative and locomotive tasks. Specifically, the holder of the post will be responsible for defining, analysing, specifying, implementing, testing and verifying the above systems for research and development RD in the space sector, for ESA core activities, ESA projects and generic laboratory applications initiating, implementing and managing future RD activities associated with the above fields, targeted towards facilitating and enabling future space projects by employing stateoftheart knowledge of robotics and advanced software systems. This also involves participating to space and nonspace expert groups and communities both inside and outside ESA providing expert robotics support to ongoing and future ESA projects, by supporting the system engineering process in all phases i.e. creation of requirements, system and test specifications, by performing engineering investigations, critical tradeoffs and optimizations of critical components through theoretical andor practical analysis and testing, and by reviewing project documentation seeking and maintaining strategic partnerships with relevant players in space robotics to optimally leverage and coordinate developments in the above field and to actively promote collaboration at international level. QUALIFICATIONS Applicants should have a higher university degree preferably at PhD level or equivalent qualification in a domain relevant to robotics and mechatronics. An active academic record of RD in the field, preferably with emphasis on telerobotics, haptics and robotic control infrastructures, would be an asset. In particular, candidates should have experience in the design and development of robotic components andor systems, as well as experience in defining and managing RD activities involving small groups of people. Applicants should have good interpersonal and communication skills with the ability to work effectively and cooperatively in a diverse and international team environment and to define and implement solutions in line with team and individual objectives and project deadlines. In addition, they should have good analytical, organizational and reporting skills, a proactive attitude to solving problems and an interest in innovative technologies. The working languages of the Agency are English and French. A good knowledge of one of these two languages is required together with a working knowledge of the other language. Knowledge of another member state language is an asset. CLOSING DATE The closing date for applications is 29 August 2013. Applications from external candidates for this position should preferably be made online at the ESA Web Site www.esa.intcareers. Those unable to apply online should submit their CV to the Head of the Human Resources Division, ESTEC, Keplerlaan 1, 2201 AZ Noordwijk ZH The Netherlands. The Agency may require applicants to undergo selection tests. Under ESA Regulations, the age limit for recruitment is 55. Please note that applications are only considered from nationals of one of the following States Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Romania, Spain, Sweden, Switzerland, the United Kingdom and Canada. Priority will be first given to internal candidates and secondly to external candidates from underrepresented member states. In accordance with the European Space Agencys security procedures and as part of the selection process, successful candidates will be required to undergo basic screening before appointment.
Tags: system
software
engineer
robotics
Sealing System Design Software improves project efficiency.
2013-07-10 14:30:48| Industrial Newsroom - All News for Today
Intended for design departments using Roxtec sealing system, Roxtec Transit Designer™ facilitates product selection according to requirements and improves entire process of designing, purchasing, and installing cable and pipe transits. Design teams can share work online with project teams anywhere worldwide, and Roxtec transit design experts are available to help via built-in chat function. Users can copy and paste information to generate manufacturer-approved drawings and documents. This story is related to the following:CAD/CAM Software | Software Engineering Process Development Tools |
Tags: system
software
design
project
Length Measuring System Software helps cut complex miters.
2013-07-09 14:31:04| Industrial Newsroom - All News for Today
When attached to any chop saw or radial arm saw, SawGear automated length measuring system eliminates miss-cuts and inaccuracies. Included Crown+MiterPro software enables users to cut and install all types of trim, such as crown, base, shoe, and casings, as well as rafters. Software calculates difficult crown angles and lengths instantly, providing both right angle and side to set miter saw, along with correct length for part, ensuring perfect part is cut first time, every time. This story is related to the following:Measuring Software
Tags: system
software
length
complex
Simulator Software provides recording system evaluation.
2013-06-26 14:28:32| Industrial Newsroom - All News for Today
Available for Talon® analog and digital recording systems, SystemFlow Simulator includes virtual recorder server application that simulates disk and I/O transactions for realistic recording environment. Using SystemFlow GUI or API, virtual server provides live, interactive operation for training or development. Product demonstrates actual Configuration, Record, Playback, and Status screens of GUI, and also includes Signal Viewer to display simulated live signals being digitized and recorded. This story is related to the following:Simulation Software
Tags: system
software
evaluation
recording
Sites : [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] next »