je.st
news
Tag: optical
Optical Communication Payload Operations, Guidance and Navigation Engineer mf
2015-10-12 12:04:58| Space-careers.com Jobs RSS
Space Applications Services performs and supports system and software engineering for the European Space Agency ESA, National Space Agencies and the aerospace industry. We are involved in international manned unmanned spacecraft programmes, earth observation, science, exploration, communications and related technology development. We require staff, wishing to join our team to work in a dynamic international environment for the following position Optical Communication Payload Operations, Guidance and Navigation Engineer mf Tasks and Responsibilities The work will be performed at the European Space Operations Centre ESOC in Darmstadt, Germany. This position, generally referred to as a Spacecraft Operations Engineer SOE, is responsible for the support to the Sentinels missions as a member of the Flight Control Team FCT during the operational phases, including special operations, and will also participate in test campaigns. The position will include the following tasks and responsibilities Act as Expert operations engineer in the Sentinels Optical Communication Payloads and in the Guidance and Navigation areas, during Launch and Early Orbit Phase LEOP, Commissioning and Routine phases. Validation, test and operation of the Simulator and of the Mission Control System MCS including the OnBoard Software Maintenance OBSM and Mission Planning System. Generation, validation and maintenance of the Flight Operations Plan FOP primarily on Attitude and Orbit Control System AOCS and Optical Communication Payload OCP, but also for other subsystems. Support to test and operate the Network Data Interface Unit NDIU. Support for Flight Operations System FOS procurement, integration and tests. Review of satellite documents. Launch and Early Orbit Phase LEOP support responsible for AOCS. Commissioning support responsible for AOCS and OCP. The tasks to be performed require considerable initiative, flexibility and independence in executing the assigned tasks. Qualifications and Experience Applicants should have as a minimum a Bachelors degree in a relevant discipline and minimum 3 years of experience in Operations Engineering activities. The following qualifications and experience are required Demonstrates knowledge and experience in Satellite Flight Operations, including FDIR, in particular in the areas of optical communication payloads operations laser links, Sentinels OCP and guidance and navigation AOCS, Ground Navigation and control are required. Experience with Packet Utilisation Standard. Experience in working in an operational environment. Experience with flight procedures life cycle, including validation. Experience with anomaly investigations. Ability to understand and accurately predict behaviour of complex systems. Experience with low Earth orbit satellites operations, including experience in preparatory phase OPSPREP, special Operations LEOP, deorbiting campaign and routine operations. The ability to work independently with little supervision. Wellorganised, able to prioritise and manage several activities in parallel. Capable to coordinate and Interact with other service providers in operations and other fields. Fluent in English, both written and spoken. Familiarity with operational simulators, ideally SimSat, and management of SW life cycle. Familiarity with satellite control systems, ideally SCOS2000. Familiarity with Earth Observations missions, in particular with Copernicus Sentinels. Familiarity with Telemetry and Telecommand TMTC databases, preferably SCOS2000 compatible. Familiarity with multisatellite missions. Experience in ground tests preparation and execution, e.g. Satellite Validation Test. Experience in cooperation with Flight Dynamics teams. The following experience is desirable Familiarity with Network Distribution and Interface Units or similar Electronical Ground Segment Equipment EGSE. Familiarity with Mission Utility Support Tools MUST system used at ESOC. Familiarity with ESOC working environment and Quality Management System QMS. The position is located on site at ESOC and will involve short European travels. Conditions Please apply by filling in the online application form and uploading your CV and Motivation Letter both in English on the Careers section of our website www.spaceapplications.com. The deadline for applications is the 23rd of October, 2015. An interesting remuneration package will be offered with relocation assistance where necessary. For additional information, please contact Ms. Floriane Thomas at Space Applications Services jobsspaceapplications.com Leuvensesteenweg 325, 1932 Zaventem Tel 32 02721.54.84 32 02721.54.84
Tags: navigation
communication
operations
guidance
High-Density Passive Optical TAP aids network traffic monitoring.
2015-10-06 14:31:07| Industrial Newsroom - All News for Today
Without introducing points of failure when accessing network traffics, 48-channel High-Density Passive Optical TAP solution provides varying line-rate (for 1G/10G/40G/100G) access to individual network links independently. Unit holds up to 48-channel TAP capability in unidirectional line or 24-channel TAP capability in bidirectional lines based on standard LC connector and multiple 24-CH TAP capability up to 192-channel based on MPO connector termination or mix of 2 modes in 1RU chassis.
Tags: network
traffic
aids
monitoring
Coherent Optical Receivers feature bandwidth up to 70 GHz.
2015-10-05 14:31:08| Industrial Newsroom - All News for Today
Pairing with LabMaster 10-65Zi-A oscilloscope, 70 GHz Model IQS70 provides system bandwidth of 65 GHz, delivering solution for characterizing 56 Gbaud communications systems and enabling detection up to 130 GBaud. For lower-rate applications, 42 GHz Model IQS42 provides test platform for up to 32 Gbaud DP-16QAM or DP-QPSK when used with 36 GHz LabMaster 10-36Zi-A. Optical-LinQ software runs within oscilloscope, providing measurement and visualization of optically modulated signals.
Tags: feature
optical
ghz
bandwidth
Nanophase to Exhibit and Present Optical Polishing Solutions at Optifab 2015
2015-10-02 12:31:11| Industrial Newsroom - All News for Today
Romeoville, Illinois Nanophase Technologies Corporation, a global provider of engineered nanomaterial solutions, will present two papers and exhibit their optical surface polishing products at next months Optifab conference in Rochester, N.Y. Nanophase representatives will be at Booth 304 at the Oct. 12-15 show...
Tags: present
solutions
exhibit
optical
FMC Subsystems offer optical interface solutions.
2015-09-30 14:31:07| Industrial Newsroom - All News for Today
Combining performance of Virtex-7 and optical interconnects with flexibility of multichannel FMC data converter, FlexorSet™ Series creates complete radar and software radio sub-system. FlexorSet Model 5973-312 for 3U VPX and Model 7070-312 for PCIe, utilize Flexor Model 3312 4-Channel A/D and D/A FMC installed on either of 2 Flexor FMC carriers. Both are pre-configured with IP, providing built-in functions for data capture, synchronization, time tagging and formatting.
Tags: offer
solutions
interface
optical
Sites : [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] next »