Home copernicus
 

Keywords :   


Tag: copernicus

Copernicus S3 Flight Dynamic Engineer

2015-01-26 19:05:04| Space-careers.com Jobs RSS

Review of Sentinel3 spacecraft and groundsegment technical documentation and participation and transition to routine operations, perform required mission and system studies, preparing technical notes and attending to technical meetings as requested Preparation and maintenance of Flight Dynamics operational configuration and procedures for spacecraft routine, contingency and special operations Routine Flight Dynamics operations including spacecraft orbit determination and prediction, events computation and generation of related orbit products or predictions, Attitude and Orbit Control System AOCS telecommand parameter generation and telemetry monitoring as necessary Planning and execution of spacecraft manoeuvres, as well as their evaluation, thrusters calibration and maintenance of fuel budget estimates Planning and related implementation of collision avoidance manoeuvres as well as support to contingency operations, including recovery of routine operations, satellite safe mode support and operation transfer to the BackUp Control Centre these activities may require intervention during the night and the nonworking days Performance analysis of the Flight Dynamics operations, with special focus on the areas impacting end user services or product performances, and implementation of corrective actions as necessary Preparation and production of related routine reports as necessary Experience and education The candidate shall have the following profile University Degree or equivalent in a relevant discipline Demonstrated thorough understanding of space flight dynamics concepts and techniques, with special emphasis on Low Earth Orbit LEO regimes At least 5 years Experience of flight dynamics system development or operations based on NAPEOS or derived software At least 3 years of general programmingsoftware development F90, TCLTK and, as desirable, Matlab and Java Ability to understand and synthesise complex issues and to express ideas and issues clearly. The Consultant shall be able to conduct all activities in an orderly and disciplined manner, shall be able to work calmly and correctly under stress and must be able to work with the minimum of supervision. The official languages of EUMETSA T are English and French. The working language for the position is English and therefore the consultant must be able to work effectively in this language, together with good communication skills.

Tags: dynamic flight engineer copernicus

 

Copernicus S3 Mission Planning Engineer

2015-01-26 19:05:04| Space-careers.com Jobs RSS

The Mission Planning Engineer shall perform tasks related to mission planning operations, primarily involving the management and use of the Payload Data Ground Segment Mission Planning Facility PDGS MPF and the Flight Operations Segment Mission Planning System FOS MPS, within a SCOS2000 based mission control system. The tasks include Performing routine biweekly and contingency scheduling tasks using the MPF and MPS Performing preventative maintenance on the MPF or MPS according to working practice, generally by running system checks to spot any system anomalies or errors Raising anomaly reports when necessary and monitoring their resolution through attendance at appropriate review boards. Supplying context and initial analyses that may aid the investigation of anomalies Responding to mission planning related anomalies and operational contingencies promptly Maintenance of mission planning documentation such as the User Guide document and the Operational Implementation document Liaising with external entities where necessary in order to fulfil joint operations requirements. Maintaining documentation concerning this Maintaining a detailed understanding of the Sentinel3 space and ground segment operational needs that are met through mission planning. Through regular liaison with space and ground segment experts, implementing, testing and documenting new or modified operational needs that are met through mission planning Performing the maintenance, update, validation and documentation of the MPF operational implementation in all mission phases. The MPF operational implementation resides in a relational database and associated business rule management system, and is used to generate schedules related to satellite payload mission planning Rolling out of new versions of the MPF operational implementation following approved configuration management procedures Performing the maintenance, update, validation and documentation of the MPS rules and constraints file in collaboration with the Flight Control Team Maintaining an understanding ofthe SCOS2000 MCS Working Operational Database, in which the linkage between Sequences Requests and telecommands is defined Contributing to the definition of any changes to the supplied mission planning application software or to inhouse supporting software that could lead to performance andor ergonomics improvements. Contributing to the process of implementing such changes, and liaising with any external contractors that may be performing the changes Contributing to the definition and raising of Engineering Change Proposals and Change Requests concerning mission planning, and attending ECP Review Board meetings if necessary Contributing to the operational validation of new versions of mission planning application software, including testing of ARNCR correction and new functionality. This may include FAT or OSAT attendance Participation in any necessary meetings and reviews long term scheduling, schedule consolidation, anomaly review boards, etc Training of personnel in mission planning tasks as required Experience and education The candidate shall have the following profile In addition to having a university degree or equivalent in a relevant discipline, the Consultant shall have at least 3 years experience of low earth orbit LEO spacecraft and ground segment system operations mission planning, satellite monitoring and control using SCOS2000. Furthermore, the following experience is required At least 3 years of general programmingsoftware development, including at least 1 year of software development in Java or an equivalent e.g. Drools, JBoss Rules At least 2 years working with relational databases and sql, preferably involving Oracle database administration At least 2 years of working with files in XML format At least 2 years of Linux operating system administration. At least 1 year of software development in C, with knowledge of Oracle database access using ProC advantageous The Consultant shall be able to conduct all activities in an orderly and disciplined manner, shall be able to work calmly and correctly under stress and must be able to work with the minimum of supervision. The Consultant should be used to working proactively within a small team. The official languages of EUMETSAT are English and French. The working language for the position is English and therefore the consultant must be able to work effectively in this language and have knowledge of the other, together with good communication skills. About ATG Europe Today, ATG is recognized as a leading provider of specialized engineering, scientific and technical services to the European Aerospace, High Tech and Offshore industry. Our headquarters is located in Noordwijk, The Netherlands and we have subsidiaries in Germany and the UK. ATG People is the key player in delivering highly educated personnel for RD environments throughout Europe. We are continually recruiting experienced Engineers for exciting, full time positions based at our customers. As an ATG Engineer, you will be working on very diverse missions and assignments. This opens up unique opportunities to be engaged in innovative projects and challenging you to perform to high standards and utilizing the full extent of your professional knowledge. We need you to complement our super star team! Interested? Submit your CV and personal details through our website or send your application directly to recruitmentatgeurope.com. We encourage you to submit your CV in the Europass format. Click here to create a Europass CV.

Tags: planning mission engineer copernicus

 
 

Copernicus S3 Mission Control System Engineer

2015-01-26 19:05:04| Space-careers.com Jobs RSS

The Mission Control System Engineer MCSE shall perform tasks related to mission control operations, during the routine operations phase. The tasks primarily involve the operations and operational configuration of the Flight Operations Segment Mission Control System FOS MCS based on SCOS2000 the Network Data Interface Unit NDIU interface to the SBand TTC ground station equipment other operational interfaces of the MCS, including those within the FOS satellite onboard software maintenance capability, and satellite simulator. The MCSE performs or contributes to the maintenance, update, validation and documentation of the mission control operational implementation and application software. The operational implementation is defined in the relevant operations procedures and documentation produced by and for the operations team, execution scripts used to operate andor maintain the FOS MCS, and operational databases and displays related to satellite payload and platform monitoring and control, in the context of the provision of Sentinel3 operational services. Experience and education The candidate shall have the following background At least 3 years experience defining and executing spacecraft and related ground segment system operations At least 3 years experience operating andor maintaining spacecraft monitoring and control systems based on SCOS2000 and employing the Packet Utilisation Standards PUS At least 3 years experience developing andor maintaining spacecraft mission control systems software for a platform based on the Linux operating system. At least 2 years experience defining and implementing the verification and validation of spacecraft mission control systems software At least 2 years experience of spacecraft and ground segment operations preparation and early operations activities, including operations procedure development and system validation, and commissioning The candidate shall have the following specific technical skills and experience Low Earth Orbit LEO spacecraft and related ground segment system operations, in particular for ERS, SPOT, Envisat andor Metop Network Data Interface Unit NDIU systems and their operation in support of the interface between the MCS and TTC ground stations Satellite simulator maintenance andor operation, preferably including the Portable Satellite Simulator PSS Maintenance of satellite onboard software. About ATG Europe Today, ATG is recognized as a leading provider of specialized engineering, scientific and technical services to the European Aerospace, High Tech and Offshore industry. Our headquarters is located in Noordwijk, The Netherlands and we have subsidiaries in Germany and the UK. ATG People is the key player in delivering highly educated personnel for RD environments throughout Europe. We are continually recruiting experienced Engineers for exciting, full time positions based at our customers. As an ATG Engineer, you will be working on very diverse missions and assignments. This opens up unique opportunities to be engaged in innovative projects and challenging you to perform to high standards and utilizing the full extent of your professional knowledge. We need you to complement our super star team! Interested? Submit your CV and personal details through our website or send your application directly to recruitmentatgeurope.com. We encourage you to submit your CV in the Europass format. Click here to create a Europass CV.

Tags: system control mission engineer

 

Copernicus S3 Ground Segment System Engineer

2015-01-26 19:05:04| Space-careers.com Jobs RSS

The Ground Segment System Engineers GSEs shall support the Sentinel3 Operations with respect to EUMETSATs S3 Ground Segment maintenance and necessary evolutions, including the necessary coordination with the other S3 Ground Segments and Core Ground Stations at architectural and system engineering level and also for the related functions and interfaces between those ground segment and within the EUMETSATs Sentinel3 ground segment including the EUMETSAT MultiMission Elements. In addition, the Ground Segment Engineers shall provide support to the AIV activities during the integration of the S3 ground Segment and shall coordinate the verification of the new systems and their interfaces into the EUMETSATs Sentinel3 ground segment. The Key Persons duties will include a range of tasks, from preparing and providing the support of the day to day operation and maintenance currently in the preparation phase, the analysis, and ground segment level testing of the facilities which also includes the handling of anomalies, design of upgrades and configuration changes for these facilities at overall ground segment level. The Key Persons will be the focal point when it comes to integrating the individual Facilities into a ground segment system, covering all aspects of system integration and testing, including endtoend testing of the overall EUMETSAT s Sentinel3 ground segment including the EUMETSAT MultiMission Elements. Tasks will also contain the maintenance of an uptodate set of design documents and Interface Control Documents for the operational systems and shall perform technical analysis of system architecture and specification for evolutions or major upgrades of the S3 ground segment. In support to operations, the Key Person may also be required to provide on call support as part of a team of maintenance engineers, especially for the S3 commissioning and initial operations phases. Experience and education The candidate shall have the following background 5 years of experience in system engineering for the development or major upgrades including support to operations and maintenance of EO related ground segments or main components of them based on large scale software systems is required. Knowledge and experience is required in ECSS, ISO, Software development related Ground System engineering processes and standards. Definition, management and traceability of requirements structure with the support of dedicated tools e.g. DOORS The candidate shall have the following specific technical skills and experience Experience of ground segments which are designed and developed taking advantage by the reuse of existing generic infrastructure and functional elements System and Interfaces Engineering AIT experience for the development of major upgrades I new ground systems in a 247 operational environment. Good knowledge of at least 2 of the following and an overview of the others o Networking Communications, o Near RealTime Data Processing, o Monitoring and control of satellites, o Monitoring and control of ground systems Experience in Ground Segment I, V V About ATG Europe Today, ATG is recognized as a leading provider of specialized engineering, scientific and technical services to the European Aerospace, High Tech and Offshore industry. Our headquarters is located in Noordwijk, The Netherlands and we have subsidiaries in Germany and the UK. ATG People is the key player in delivering highly educated personnel for RD environments throughout Europe. We are continually recruiting experienced Engineers for exciting, full time positions based at our customers. As an ATG Engineer, you will be working on very diverse missions and assignments. This opens up unique opportunities to be engaged in innovative projects and challenging you to perform to high standards and utilizing the full extent of your professional knowledge. We need you to complement our super star team! Interested? Submit your CV and personal details through our website or send your application directly to recruitmentatgeurope.com. We encourage you to submit your CV in the Europass format. Click here to create a Europass CV.

Tags: system ground engineer segment

 

Copernicus S3 Data Processing System Framework

2015-01-26 17:06:44| Space-careers.com Jobs RSS

Experience and education The candidate shall have the following background 5 years of experience in maintaining and engineering of evolutions of large scale software systems missioninstrument data processing related. Experience in software development lifecycles Software debugging and profiling tools e.g. GDB, DBX, IBM Purify, Valgrind Source code control systems, preferably Subversion and CVS Competence in SW testing, unit test suite maintenance, automated testing, verification and validation. The candidate shall have the following specific technical skills and experience Experience with production frameworks, job and resource management SW Performance analysis and improvement including Performance monitoring tools and techniques top, NMON, iostat, sar etc. in UNIX environments Networking technologies and tools CCSDS protocols, Space Data Link Protocols, TCPIP, UDP multicast, PGM, FTP, Wireshark Use of and application programming of relational database systems in particular ORACLE, INFORMIX, PostgreSQL and MySQL CCJava programming language experience in a UNIXLinux based environment Knowledge of Scripting languages Python, Perl, TclTk, shell Knowledge of web technologies, programming and markup languages e.g. Apache, CGI, JavaScript, XML and related technologies XPATH, SVG, etc. Interested? Submit your CV and personal details through our website or send your application directly to recruitmentatgeurope.com. We encourage you to submit your CV in the Europass format. Click here to create a Europass CV.

Tags: system data processing framework

 

Sites : [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] next »